Lasercut Jigsaw
Neon22
An extension for Inkscape that creates jigsaw shaped pieces. Options for back, and single-cut pieces. Creates a jigsaw puzzle for laser cutting. - set dimensions in various units, - number of pieces in X,Y, - randomness and size of tabs, - rounded corners, and a backing as an option. - packed neatly for minimal cutting. Uses minimal lines to optimize for laser cutting (e.g. when using packed backboard). [Edited to work in Inkscape 1.0+] [Install from "Manage Extensions" on Extensions Tab for a simpler life] --- Review by Martin Owens on May 12 2021 2:05 PM pytest coverage 0% pylint score 0.36/10 Working in Inkscape 1.1 - 1.3
Comment here...
Lasercut tabbed box
Neon22
Creates a tabbed box with kerf setting for tight fits. Or dimples for press fits. - set dimensions in various units, - width, depth, height, material thickness, - choose number of tabs for each dimension, - include corners or not, - kerf adjustable - if tight fit required, or - can use dimples for pressure fits for wood etc (rounds or triangles), or - can set zero kerf and use minimal material to create. In all cases - uses minimal lines to optimise for laser cutting. You will find it under the Render menu in Extensions. [Edit: fixed for Inkscape 1.0] --- Reviewed by Martin Owens on May 12 2021 2:48 PM pytest coverage: 0% pylint score: 2.85/10 tested in Inkscape 1.1 - 1.3
Comment here...
Generate Palette Extension
Olibia
Inkscape extension to generate color palettes from selected objects' color properties. Usage Create objects with color properties set, can be fill and/or stroke color. Select them and from the Extensions menu choose Palette and Generate. Provide a name and select the color property to grab colors from. You can also include Inkscape's default black to white colors or replace an existing palette. New options Sort colors by xY or Yx position when objects are placed in a grid layout Sort colors by X or Y position Sort colors by selection order, HSL values or RGB values Notes Inkscape needs to be restarted for the extension to appear. Inkscape must be restarted for a new palette to appear. Generated palettes are located at ~/.config/inkscape/palettes or ~\AppData\Roaming\inkscape\palettes on Windows. Older Inkscape versions Latest version for Inkscape < 1.0: https://github.com/olibia/inkscape-generate-palette/releases/tag/v2.0 --- Reviewed by Martin Owens on May 12 2021 2:30 PM pytest coverage: 0% pylint score: -7.5/10 tested in Inkscape 1.1 Marked as UNSAFE, modified home directory files, should be changed to use new Inkscape variable which will tell it where to save the palette file it generates.
Comment here...
Knob Scale Generator
Artyom Sinitsin
Small script which allows to generate different knob scales: for front panel of devices, GUI etc. I've made it for generation of knob scales for my Modular synthesizer. Currently, it has three different styles of scales. The most recent version of plugin stores on github: https://github.com/leechwort/knob-scale-generator --- Reviewed by Martin Owens on May 12 2021 3:57 PM pytest coverage: 0% pylint score: -9.5/10 Tested in Inkscape 1.1, ok
Comment here...
Bobbin lace: grids and patterns
jo.pol
A collection of plug-ins primarily intended for designers of bobbin lace patterns. The plug-ins draw various types of printable grids of dots or pair diagrams. For non lace makers: pair diagrams are two-in-two-out digraphs. Some tools have a BSD license, others a GPLv3. An older release of the plugins (for a pre 1.0 version of InkScape) has a 5th plug-in, it complements an interactive online tool. This tool is replaced by GroundForge on https://d-bl.github.io/ The tool generates thread diagrams from pair diagrams. The new tool groups the segments of a line and doesn't need the 5th plugin any more.
Comment here...
Quickjoint
Jarrett
This is an Inkscape extension to help rapidly prototype 3D assemblies using a laser cutter, CNC router, waterjet cutter, or similar 2D process. It can quickly add box tabs to selected lines, or matching slots using guidelines. Please see the attached link for better documentation and updated files! I can't promise this page will stay up-to-date. Legacy version for old versions of Inkscape are also available at the link.
Comment here...
Ink/Stitch Embroidery Extension
Kaalleen
Inkscape extension for generating embroidery stitch files. Usage: Select objects that you want to apply embroidery properties and using the extension, set the parameters for the desired object(s). Once all desired objects have embroidery properties, use the extension to generate the necessary stitch file. A variety of raw stitch files are supported. Note: Follow the link to the Ink/Stitch website. There you can find download links, installation instructions and in depth-documentation.
Comment here...
Inkporter
Rania Amina
An extension that will help you to export your object in your SVG file to several formats (SVG, JPG, PDF, Multiple PDF Page, WEBP, and EPS) by its ID. If you're a book creator, icon designer, seller in a marketplace, web designer, this extension will help you with your task. This extension is also available as a CLI version (https://inkporter.raniaamina.id). How does Inkporter work? The simple explanation is that Inkporter will read ID patterns (i.e icon-1, icon-2, icon-3, etc) that you've set and then export them to the file format you need. Inkporter allows you to feel like you're working with artboard-like or multiple pages in Inkscape. How do you use Inkporter? Just copy and paste the Inkporter directory, inkporter.inx and inkporter.py to the Inkscape extension directory. If the installation is correct, you will find Inkporter menu in Extensions -> Export -> Inkporter. For a complete guide and the dependencies needed, please refer to the README.md file. If you need better performance of this tool, we provide Citramanik (https://citramanik.dev-is.my.id) the next generation of Inkporter. --- Reviewed by Martin Owens on May 12 2021 4:55 PM pytest coverage: 0% pylint score: 5.75/10 Tested on Inkscape 1.1, packaging issues. --- Curated by Martin Owens on May 25 2021 1:37 PM --- Curated by Martin Owens on May 25 2021 2:41 PM
Comment here...
Guide Creation Tools
Maren Hachmann
Add (colored and labelled) guides for margins, grids, diagonal guides, golden ratio and more. Find the latest version of the extension for download, examples and usage instructions at https://gitlab.com/Moini/inkscape-guide-tools This extension requires Inkscape 1.2 or higher and Python 3.
Comment here...
Shapes new version for Inkscape 1.0 - 1.2 - updated march 2022
Paco García
Updated for Inkscape 1.0 This new version adds new shapes to the previous and rearrange some tabs The Rombus shape goes to the From corners tab. Now is posible use Size for the corners New shapes Crossed corners, uses the bounding box of the selected objects for create shapes where the borders crosses himselfs in 3 different ways creating squares, triangles or circles New tab Spikes lets repeat a profile over the perimeter of the selected objects with a size and separation defined by the user. We can choose between five profiles and 3 directions: outside the selection, inside or alternate. Join circles tab creates a path that joins smoothly two circles of different radius. For get the final shape is necesary perform some extra boolean operations. UPDATED: Not need to perform boolean operations on the Join circles option in the new version, added Join circles-Oval https://youtu.be/dP8Ost-PZMI https://youtu.be/YXxL9km1PB0 https://youtu.be/Setvs4d1Yq4 New option Paper craft tab video demo: https://www.youtube.com/watch?v=cNzcQLOl18w --- Curated by Maren Hachmann on April 26 2021 2:32 PM
Comment here...
GcodePlot
Alexander Pruss
Extension to export paths to 3-axis gcode for a 3D printer or CNC router with a plotter/cutter attachment. For instructions, see the external link.
Comment here...
Gradient Saver
Rania Amina
Gradient Saver: Inkscape Gradient Manager for Your Next Project! An extension that will help you to organize your gradient on Inkscape. By using Gradient Saver you have ability to save your favorite gradient and reuse it on your next project. Hope it will help much Inkscpae user out there. For dependencies & installation info, please refer to README or this page: https://artemtech.github.io/inkscape-gradient-saver/ We've update this extension for Inkscape Ver. 1.0, hope you enjoy it. Quick demo/overview: https://youtu.be/0GPiazWcRuo
Comment here...
Instrument Scale Thumb
Neon22
Instrument_scale. Create a linear or circular arc display suitable for various kinds of panel meter. Settings for range, tick marks, labels, and angles for the circular option. Many minor improvements to label placement, corner cases fixed, etc. Useful unicode char for Temperature = ° Appears under Extensions/Render Inkscape 1.0 - 1.3
Comment here...
Removeduplicatenodes
Ellen Wasbø
Remove duplicate nodes from path and join nodes closer than a specified distance. Optionally close paths if start/end nodes are closer than a specified distance. When joining nodes the new coordinate will be interpolated from the original coordinates. If separate paths are combined (Ctrl+K) these can be joined if closer than a specified distance. This join can be either a straight line or an interpolation. The extension will appear in Extensions -> Cutlings
Comment here...
Scientific Inkscape
burghoff
A set of extensions for efficiently importing, editing, and resizing scientific figures. 1. Scale Plots: Changes the size or aspect ratio of a plot without modifying its text and ticks. Especially useful for assembling multi-panel figures. 2. Flattener: A utility that eliminates much of the structure generated by common plot generation programs and PDF imports. For most imported plots, this should be the first thing you run. 3. Homogenizer: Sets uniform fonts, font sizes, and stroke widths in a selection. 4. Auto-Exporter: Automatically exports SVG files in a directory and keeps them updated. 5. Gallery Viewer: Provides a way to view and edit the SVG contents of files or folders. 6. Text Ghoster: Adds a semi-transparent background to text so that it can be overlaid with data. 7. Combine by Color: An extension that fuses paths of the same color and style together into a single path. 8. Favorite Markers: Lets you designate certain markers as favorites so that they can be conveniently accessed. --- Curated by Martin Owens on April 22 2022 9:10 AM
Comment here...
Barcode Extension (from Inkscape 0.92)
Martin Owens
A newer version of the inkscape barcode extension from the next version of Inkscape.
Comment here...
Inkscape Stroke Font Extensions
Khemadeva .
With this set of extensions, users can - create their own stroke fonts - edit these or other fonts stored in the stroke font format - Render text using the stroke fonts with various options like flow in Rectangle, justified text etc. The font file format is the same used in Inkscape 1.0 Hershey Text extension, so the files created with this extension are compatible with the 1.0 Hershey Text render engine. Also, the fonts that come with 1.0 Hershey Text Extension can be edited with these extensions. Download location: https://github.com/Shriinivas/inkscapestrokefont File Name: inkscapestrokefont.zip Video Tutorials: https://youtu.be/iCsnYlVjWA0 https://youtu.be/-7BjfxpUAfU https://youtu.be/3YBaZfPpNjc https://youtu.be/S6lxYLMTxyg
Comment here...
Inkscape Axonometric Projections 4.0
Jeroen Hoek
This Inkscape extension transforms objects drawn on a two-dimensional plane to an isometric projection — or even any other dimetric or trimetric projection. Inkscape provides an axonometric grid that by default is configured for the isometric projection (i.e., the three axes are set at 120° angles). Drawing with this grid works quite well for simple shapes, but sometimes it is easier to draw the details of an object using a two-dimensional grid, and then scale, shear, and rotate the object to set it on an isometric plane. For more information, see: https://github.com/jdhoek/inkscape-isometric-projection For users of Inkscape versions older than 1.0-beta2, please use version 1.2 of this extension: https://github.com/jdhoek/inkscape-isometric-projection/releases/tag/v1.2 If you find a bug, please report it here: https://github.com/jdhoek/inkscape-isometric-projection/issues
Comment here...
OpenSCAD cookie cutter file output
Alexander Pruss
Generate a 3D-printable OpenSCAD cookie cutter file out of an Inkscape document. To use this: 0. Unzip into your Inkscape extensions directory. 1. Convert all objects to paths. 2. Remove all object fill. 3. Make the outer outline be a simple polygon in red. 4. Any inner hollow areas should be bounded by simple polygons in green. 5. Inner lines (which will not go all the way down and hence won't cut the cookie, so they are good for inside detail features) can be black. 6. Connections that connect inner parts to the outside should be filled-in polygons. 7. File Save As... "OpenSCAD Cookie Cutter file" 8. Load into OpenSCAD, adjust parameters, generate STL, print.
Comment here...
circuitSymbols
fsmMLK
Inkscape extension to assist creating circuit symbols. The main features are - Passive bipoles: resistors, capacitors, inductors, diodes, LEDs, photo diodes, 2 way switch - Active bipoles: various independent and dependent voltage/current sources - Operational amplifiers, bipolar transistors - Signal labeling generator with a few commonly used signals predefined - Each element can be labeled individually. Numeric nominal values are supported with optional unit inclusion - current and/or voltage annotation can be added to all elements, with custom labels. Their directions are adjustable. - adjustable orientation is available - optional LaTeX support This is a work-in-progress project. New components will be added in the future. ----- NEW ----- - added new types of diodes - added bipolar NPN and PNP transistors ---- NEW - june/2017 ---- - added MOSFET-E and MOSFET-D, both with P and N channels (kudos to kst-ttt user)
Comment here...
Inkcut
frmdstryr
An free and open source application for controlling 2D plotters, cutters, engravers, and 2D CNC machines. Inkcut includes an extension for Inkscape which allows the user to send graphics drawn in Inkscape to a cutter, plotter, or engraver. Inkcut must be installed for this extension to work, see https://github.com/codelv/inkcut for install instructions. --- Curated by Martin Owens on March 15 2021 11:09 AM
Comment here...
Another Perspective
macrico
AnotherPerspective is just a rewrite of the perspective Inkscape extension. With this another algorithme, the result should be more predictable and logic. This is the end of unexpected rotations ! Thanks to Aaron Spike for writing the original extension and Timo Kähkönen for writing the original JS algorithme. For more informations about the process read the post from which the idea of the extention come : https://stackoverflow.com/questions/12919398/perspective-transform-of-svg-paths-four-corner-distort
Comment here...
Box Maker Extension
Michael Breu
This extension produces a laser cut layout of various box types: - a closed box with a hinged top - just an open box without a top - a shelfed box To use it, just download the zip File, and put the contents into the inkscape / share / extensions file. After restart of inkscape you should now find in the extensions / render menu the option "Box Maker" that opens another form for input of parameters. Feel free to send me feedback and bug reports on https://github.com/Wallenstein61/InkScapeBoxMaker It was tested for compatibility with Inkscape 1.2 Best regards Michael
Comment here...
InkRasterPerspective
Samir Ouchene
Apply perspective transformation to raster images inside Inkscape (no need to use an external software such as GIMP or Krita). It works for both embedded and linked images. For a more complete guide on how to install and use the extension, please refer to the README.md file. Once installed properly, you can access the extension from: Extensions > Raster Perspectvie > Perspective.
Comment here...
Multiple Boolean Operations with Inx Pathops
Maren Hachmann
Boolean operations for multiple objects at once - difference, union, intersection, exclusion, division or cut. The extension is a rewrite of the Multi-Bool extension, and offers many adjustable settings and improvements. It takes a selection of one or more groups, or of several elements (paths, shapes, text), or a mix of both, and applies a chosen path operation with the top-most valid object in paint order and each other valid object which is part of the selection (directly or as member of a processed group) that is lower in Z-order. For more info, please refer to the README file at https://gitlab.com/moini_ink/inx-pathops/-/blob/master/README.md . Inkscape extension written by su-v and updated for Inkscape 1.0 – 1.4 by Maren Hachmann, licensed GPLv2 or higher.
Comment here...
Imagetracer.js for Inkscape
Mario Voigt
This extension is an InkScape wrapper for https://github.com/jankovicsandras/imagetracerjs. It utilized a standalone node.js executable to run the JavaScript code. It will be fed with embedded or linked images within InkScape. The big difference between this tracer and all other tracers in recent InkScape is the fact that it is capable of splitting an image into it's "isles". The regular tracers separate by colors but not by objects. That makes it hard to work with sometimes. Imagetracer.js will vectorize your beautiful image into a more beautiful SVG trace with separated infills (break apart into single surfaces like a puzzle), that means you get a lot of single areas. works for Linux and Windows
Comment here...
Line Animator (draw by invisible hand)
Maren Hachmann
Create simple, line-drawing animations for the web from selected paths. When you look at the file that you've applied the extension to using a web browser, it will look as if someone were drawing the paths with an invisible pen. Notes: * Find the extension as `Extensions > Animation > Line Animator` * **Only path objects** can be used for this. * **No path effects** should be applied to the paths (something may happen, but perhaps not what you expect). * The paths must have **a visible stroke** (else you won't see anything happen). * The object **lowest in stacking order** will be drawn **first**, then the one above it etc. * Animation speed can be changed by using the same animation name and selecting the same objects, then setting a different duration. * If you are animating a path consisting of **multiple subpaths**, all of them will start to be animated **at the same time**, but the shorter ones will finish first. * If you want to **change the direction** in which a path is drawn, change the path direction in Inkscape (`Path > Reverse`). Examples -------- See https://gitlab.com/Moini/ink_line_animator/-/blob/master/README.md Installation ------------ Drop the files `line-animator.py` and `line-animator.inx` into your user extensions directory. Learn where to find the directory in Inkscape: `Edit > Preferences > System > User extensions`. License ------- This software is licensed under the GPL v2.0 or higher. Note ---- Due to a bug in Inkscape (https://gitlab.com/inkscape/inbox/-/issues/9327), Inkscape 1.3 instantly crashes when you open the Selectors and CSS dialog. So don't do that!
Comment here...
Styles To Layers
Mario Voigt
This extension will re-layer your selected items or the whole document according to their color (stroke or fill). Each style will be put onto it's own layer. This way you can devide elements by their colors with ease. It does some basic-only handling of gradient styles. See also https://inkscape.org/~MarioVoigt/%E2%98%85remove-empty-groups for useful cleaning extension. Notes: - includes "Apply Transformations" extension
Comment here...
RealScale (resize by line of known length)
Maren Hachmann
Quickly resize (architectural) drawings by indicating a line and its length in real world units. Optionally scale the drawing with a specific scale factor and draw a scale rule. Version 1.2, Inkscape extension for Inkscape 1.2 and higher. Download most current version from here: https://gitlab.com/Moini/inkscape-realscale-extension/-/archive/master/inkscape-realscale-extension-master.zip Installation: Copy the files realscale.py and realscale.inx into the directory indicated in Edit -> Preferences -> System: User extensions Usage: • Import an architectural drawing / floor plan / map /... into Inkscape or open a file containing one. Make sure it is a single object (group it, if necessary). • Draw a straight line that connects two points in that drawing of which you know the distance in real life (for example, if you know how long a wall of your house in the drawing is, draw the line from one end of the wall to the other). • Select the line, then add the drawing to the selection. • Open the extension dialog: Extensions -> Scaling -> RealScale... • Enter the length of the line you just drew, as it is in the real world (for example, if your house wall is 10.5 m long, enter 10.50. • Select the unit you used (for your 10.50 m house, select m; for your 10 cm cardboard box, select cm) • If you intend to print the drawing, and the original object is bigger than the sheet, consider using a scale factor. • To do so, first select if you want to use a metric scale factor (based on mulitples of 5) or an imperial one (based on multiples of 2) or if you would like to enter your own scale factor. • Then, in the corresponding dropdown, or in the number entry field, select or enter the scale you would like to use. The dropdowns only offer scale factors for downscaling. In the 'Custom' field, however, you can also enter values smaller than 1 to upscale a drawing. • If you would like the scale rule to be drawn on the page, check the option 'Generate Scale Rule'. • Now choose the number of units the scale rule will comprise. Those will be doubled in the generated scale rule - e.g. it will show 10 cm to the left of the scale rule center (labelled 0) and 10 cm to its right. • Apply!
Comment here...
Remove duplicate lines with tolerance
Ellen Wasbø
Remove overlapping line segments to clean paths for cutting/plotting/engraving. As an option you can set a tolerance when comparing the line segments such that a perfect match is not needed. Read more and see examples here: http://cutlings.wasbo.net/inkscape-extension-removeduplicatelines/ The extension will appear in Extensions -> Cutlings
Comment here...
Living Hinge Creator
drphonon
A new version is available for Inskcape 1.0 and higher. Search the extension repository for "Living Hinge Creator for Inkscape 1.0" This extension creates cut lines to make a living hinge when laser cutting material. Options include the length of the cuts, the separation between sequential cuts, and the separation between adjacent cuts. All parameters are stored in the "Object Properties" field of the resulting object. Installation Download and unzip the file. Copy living_hinge.inx and src/living_hinge.py to your extension directory. --Linux Run the shell script copy_files.sh. This will copy living_hinge.inx and src/living_hinge.py to ~/.config/inkscape/extensions Instructions on how to use the extension can be found here: http://wiki.lvl1.org/Inkscape_Extension_to_Render_a_Living_Hinge
Comment here...
Output Pro
wout
With this extension you will be able to export your Inkscape documents into a variety of formats and colormodes. As it initial and main goal,Inkscape Output Pro export into the CMYK colormode, compatible with the press and graphic industry standards. It is possible to use specific ICC profiles, set other colormodes than RGB and CMYK, like Grayscale and Lab, set specific JPEG configurations, insert pre-press marks and even more.
Comment here...
Download Palette Extension
Olibia
Inkscape extension to download color palettes from the web. Usage From the Extensions menu choose Palette and Download. Select one or more palettes to download from the predefined collection. Provide a name and a .gpl file URL to download a palette from the web. Notes Inkscape must be restarted for palettes to appear. Downloaded palettes are stored in ~/.config/inkscape/palettes. Tested only on Inkscape for Linux.
Comment here...
Color Swap
jeko
Extension similar to "color replace" that swaps two user defined colors. The zip file contains versions for Inkscape 0.92, 1.0, 1.1, 1.2 The underlying color extension has a regression in 1.0 and does not work on grouped objects. This has been fixed in later versions. Only tested on Windows but should work on all platforms.
Comment here...
Svg2ico
Apollonian Master
macbuse
Extension to make Apollonian gaskets. Tested Inkscape 0.91. An Apollonian gasket can be constructed as follows. Start with three circles C1, C2 and C3, each one of which is tangent to the other two (in the general construction, these three circles can be any size, as long as they have common tangents). Apollonius discovered that there are two other non-intersecting circles, C4 and C5, which have the property that they are tangent to all three of the original circles – these are called Apollonian circles. Adding the two Apollonian circles to the original three, we now have five circles. Take one of the two Apollonian circles – say C4. It is tangent to C1 and C2, so the triplet of circles C4, C1 and C2 has its own two Apollonian circles. We already know one of these – it is C3 – but the other is a new circle C6. In a similar way we can construct another new circle C7 that is tangent to C4, C2 and C3, and another circle C8 from C4, C3 and C1. This gives us 3 new circles. We can construct another three new circles from C5, giving six new circles altogether. Together with the circles C1 to C5, this gives a total of 11 circles. Continuing the construction stage by stage in this way ad infinituum one obtains a set of circles which is an Apollonian gasket. Source: Wikipedia
Comment here...
Snap Object Points
Scott Pakin
Snap nearby points across two or more paths to their average coordinates. This extension can be used to help interlock adjacent shapes like pieces of a jigsaw puzzle.
Comment here...
Primitive for Inkscape
Mario Voigt
Primitive - Reproducing images with geometric primitives written in Go. This InkScape extension just wraps https://github.com/fogleman/primitive into InkScape to quickly get cool traced vector graphics works for Linux and Windows
Comment here...
Pixels to Objects
Scott Pakin
Select a bitmap and one or more other objects, and run Extensions → Raster → Pixels to Objects…. The extension will place one copy of an object at each pixel coordinate. For example, a 32×32 image will lead to objects being placed at coordinates (0, 0) through (31, 31). Options enable objects to have their stroke and/or fill color adjusted to match the corresponding image pixel; background-colored pixels to be either considered or ignored; image coordinates to be scaled up or down; and multiple objects to be assigned to coordinates either randomly or deterministically. For instance, in the banner image above, a 16×16 bitmap was selected along with four path objects of size at most 18×18. In the dialog box, "Apply color to stroke" and "Ignore background pixels" were checked. "Image coordinate scaling" was set to 18 to prevent the path objects from overlapping. And "Instantiation of multiple objects" was set to "By image coordinates" to cycle evenly through all four path objects.
Comment here...
Hatch fill
Maren Hachmann
Extension based upon the eggbot_hatch extension from https://github.com/evil-mad/EggBot. Creates plottable hatches (simple, cross-hatch, in a single path or separate) in all closed objects in the drawing or in all selected objects. Improvements include: * Updated to work with Inkscape 1.2 and higher * Simplified a portion of the code * Added the option to choose units for the hatch distance and inset * Only depends on inkex now, which makes installation much easier License: GPLv2 or higher
Comment here...
Spirograph
fsmMLK
This extension will assist you creating spirograph curves using Inkscape. --- Curated by Maren Hachmann on April 26 2021 2:39 PM
Comment here...
Simple Inkscape Scripting
Scott Pakin
Simple Inkscape Scripting makes it easy to automate repetitive drawing tasks. It defines a simple set of Python functions such as "rect" to draw a rectangle and "line" to draw a line. For example, the one-line program "for r in range(7, 0, -1): circle((100, 100), 10*r, fill=['white','red'][r%2])" is all it takes to draw a bullseye. Invoking the extension (Extensions → Render → Simple Inkscape Scripting…) brings up a dialog box that lets you load a Python script from a file or enter Python code directly in a text box. Shapes produced by the script appear directly on the canvas and can be edited just like any other shape. See https://github.com/spakin/SimpInkScr for details and examples.
Comment here...
Mirror
jeko
Extension to mirror/flip objects along a line. The zip file contains 4 versions: for Inkscape 0.92, 1.0, 1.1, 1.2. Only tested on Windows but should work on all platforms. You need to select two objects simultaneously and then apply the extension. Select the object (shape, group, image, etc.) you want to mirror first, press "shift", and then select the mirror line (consisting of exactly 2 nodes) second. The extension can be found under "Extensions -> Modify Path -> Mirror"
Comment here...
Multipage Export Extension
Olibia
Inkscape extension to export selected objects to various file formats. Usage Select the objects you want to export and from the Extensions menu choose Export and Multipage. Provide a name for the destination folder and select the export format. Available formats are PDF, PNG and SVG. Available exporters are rsvg, and inkscape. You can also name the exported files after the objects' IDs Combine PDFs requires pdftk installed in your system Notes Exported files are located at ~/Documents/Exports. Tested only on Inkscape for Linux. Older Inkscape versions Latest version for Inkscape < 1.0: https://github.com/olibia/inkscape-multipage-export/releases/tag/v2.0
Comment here...
objectgradient
biapy
Inkscape extension to apply a gradient of colors accross selected objects. Once installed, the extension is available at "Extensions -> Render -> Object gradient".
Comment here...
Contour Scanner And Trimmer
Mario Voigt
This tool helps you to find nasty contours which might bug you and prevent your work from being ready for production. It will find open contours, closed contours and self-intersecting contours. Self-intersecting contours can be closed or open contours so you can select this option additionally! Bentley-Ottmann algorithm is used to check for those intersections. The algorithm works with the accuracy of the selected paths (epsilons). Self-intersections usually happen if you just have large overlaps where the contour crosses itself like an 'eight' character for example. Using the highlighting it's easy to find contours with unproper path handles. While in a CAD system an area of of a surface can only be calculated if the contour is closed and clean, finding self intersections in InkScape is not required to do so. SVG format allows to calculate areas on open contours and self-twisted curves. This "artwork behaviour" makes it harder for handling machinery-like drawings for laser cutting, vinyl cutting or whatever. That's why we need to have extra sanity checks but we also have the great freedom of Inkscape. Finding self-intersecting contours does only work for curves with straight line segments (polylines) because it just calculates with a set of given XY points. It does not respect bezier curve segments. Bezier curves have no regular points but special handles, which define the slope of the curve per handle side (left and right). To properly handle a bezier curve we need to split the bezier curve in a lot of small linear segments (acting like infinitessimal solution). We can use the tool "Flatten Bezier to do this (will make your curve looking edgy or ugly possible). If you want to leave the shape of the line clean (bezier type, no edgy approximation) we can use Split Bezier (Subdivide) or Add Nodes instead. But remember that your calculated self-intersection points will only be an approximation then. The higher the subdivide count is the higher the precision of the calculated self-intersecting points coordinates will be.
Comment here...
Conical box generator
thierry7100
This extension will generate a flex structure which could be used to build conical boxes, to be cut with a laser cutting machine.
Comment here...
cartesianPlotFunction2D
fsmMLK
Inkscape extension to plot functions of one independent variable. main features: - linear and log10 scales - optional grid lines in X and Y directions - adjustable tick mark intervals and sizes - LaTeX support This extension was inspired by Tavmjong Bah's (and collaborators) extension Function Plotter already presented in Inkscape. Function Plotter extension is not required here. The main difference between Tavmjong's extension and this one is that here you can also generate and customize the Cartesian axes with your plot
Comment here...
Guilloche Pattern Extension
fluent_user
Inkscape extension to create guilloche patterns. Usage You just need to draw a base path, e.g. straight line or ellipse, and use a guilloche_contour extension (it's inside an archive) to create borders based on it. After that you need to select 2 of desired borders and apply guilloche_pattern extension. P.S. This Extension was made on Windows. Not sure how it will work on Linux or OS.
Comment here...
Shape recognition
qpad
This extension allows to replace hand drawn paths with regular shapes (segments, rectangles, circle and ellipses) recognized from the paths. It also tries to harmonize lenghts and angles of the recognized shapes
Comment here...
Inkscape-export-layers extension
Xavi
Inkscape extension to export SVG layers as (JPG, PNG) images. The exported images can be a combination of multiple layers. Please click on the external link for updates. Its the official repository on github.
Comment here...
Join Paths Effect
Khemadeva .
This extension lets the user join SVG paths. After installing, it would appear under Extensions->Modify Path menu. Select the paths that are to be joined and invoke the 'Join Paths' menu option. If the ending nodes of the paths to be joined don't coincide, an extra segment is created; if they do they are merged. Quick Introduction: https://youtu.be/mC7rtjkT4kc Update (Apr 10, 2019) I have uploaded a variant of this extension on github. This will join the paths based on distances. Do let me know if you come across performance or other issues. Video: https://youtu.be/3-cVmrlBRAI Update (June 26, 2024) This extension is rewritten using the latest inkex APIs. Also added options to determine path order based on selection, z-order and distance along with a few other options. Do check it out and open issue on GitHub if you come across any problem.
Comment here...
Transparentify
schulzki
Adds transparency to the selected elements, while keeping the original color value. The color is calculated with respect to a background color, so that the element will have it's original color when overlaying the background. The background is white by default, but might be set to any other color. If the amount of transparency ist set to high, the rgb channels might exceed the possible value range of 0 -255. In this case, the highest possible transparency is applied. Alternatively, you can check the "force transparency" option, which will adjust the color to allow the desired transparency. The extension is available under extensions/color. It applies to stroke and fill and also works on gradients and elements, which already have an transparency set. Transparentify is available for inkscape v.1.x. --- Curated by Martin Owens on May 12 2022 3:39 PM
Comment here...
Color Label
christophfink
adds text labels with the fill colour value of each selected feature
Comment here...
Inventory Sticker
Mario Voigt
This extension generates inventory stickers for thermo printers (we use Brother QL-720NW) from our Teedy instance. Teedy is an open source software document management system (DMS). This extension is tested in Linux (Ubuntu 20 LTS) and Windows 10. Source code can be found in https://gitea.fablabchemnitz.de/MarioVoigt/mightyscape-1.X/src/branch/master/extensions/fablabchemnitz More details: https://fablabchemnitz.de/display/IFM/Inventory+Sticker
Comment here...
Customise User Interface
Mr. Raven
This extension allows you to show or hide menu items and toolbar buttons in Inkscape. The purpose of this is to: - Hide user interface elements you don't want to see. - Make the interface simpler for educational purposes. - Tailor Inkscape towards a specialised working enviroment. I welcome comments, ideas, suggestions, bug reports. If you use it, please write something at the bottom of this page. Installation. Download the .zip file. Installation instructions and a manual are in the file "custui_Readme.html", which is included in the zip file. I will also submit this extension for review so it may become available in the extensions manager. Inkscape 1.0 on Windows misses a "HarfBuzz" library that is needed. If you use Inkscape 1.0 on Windows, you need to install the HarfBuzz library manually. Instructions are in the Readme file. Many thanks for testing and also advice and ideas: @Kirstie, @DoctorMo and @Adam.Belis Changes for version 0.3: - Change the interface too look a bit better - Add function to restore default settings - Make some more items in View menu immutable for Inkscape 1.1
Comment here...
Creative Empty Page
Hervy Qurrotul Ainur Rozi
Empty page for Social Media branding and Creative Marketplace. Only support for inkscape 1.0.x # Install ## GNU/Linux - copy file .inx and .py. - paste into ~/.config/inkscape/extensions/ ## Windows - copy file .inx. - paste into C:\Program Files\Inkscape\share\inkscape\extensions\ # How to Use - File > New from new template (Ctrl + Alt + N). - Choose "Branding and Social Media..." or "Creative Marketplace..." *issue: https://gitlab.com/hervyqa/creative-empty-page
Comment here...
Playing Cards
DerElam
This Inkscape extension creates templates for playing cards. It lets you define: - the width and height of the cards, - an optional bleed for the cards, - an optional horizontal or vertical fold line, - a minimal distance between the cards, - a minimal distance between the cards and the fold line, - distance between cards and crop marks, - an optional page margin and a frame around all cards, and - an optional alignment grid. A short documentation can be found at GitHub: https://github.com/DerElam/inkscape-extension-playing-cards
Comment here...
WebP Import
Mario Voigt
Import *.webp image files using ImageMagick conversion. Routine is webp → png → svg → write into Inkscape canvas. You might need to install ImageMagick. The command "magick" or "convert" needs to be in path variable. See https://stadtfabrikanten.org/display/IFM/WebP+Import
Comment here...
Label Guides
jjbeard
Easily create label guides for common labels. Make your own label geometry and add inset guides and shapes.
Comment here...
Extruder for 3-d Papercraft
Sue Zakar
This extension creates the pieces needed to construct a 3D extruded papercraft project from a path (composed of straight segments) that defines its shape. Tabs and score lines are included. Both the decorative an the structural pieces are created. When installed, it will be under Extensions -- Papercraft Most recent documentation and code are at the link provided Updated to correct scoring color: 08/19/2022
Comment here...
TGS/Lottie Import/Export
Mattia Basaglia
Adds extensions to open and save Telegram Animated Stickers and Lottie files. Note that the lottie python module needs to be installed https://pypi.org/project/lottie/ and it requires Python 3
Comment here...
Duplicate, reverse and join to create stickfont
Ellen Wasbø
With using a sketch pen with my plotter, I prefer the true single line SVG fonts that draw the lines only once. But – as these true single line fonts cannot be installed and be used as regular outline fonts I would like to offer my single line fonts as stick fonts too. A stick font is an outline font with zero with so that the letters will be traced twice. I wrote an Inkscape extension to effectively converting a single line SVG font to a TTF stick font. Visit the link to the right (my blog) to learn how to. NB! The extension uses the reverse function which was not implemented correctly in Inkscape v1.0.1 so you will need to update the paths.py. Read howto in the link.
Comment here...
Printing Marks Dotted
Jabiertxo Arraiza Cenoz
Add crop marks visible over dark bleeds
Comment here...
Maze
thjazi
this extension makes it possible to generate mazes using different algorithms it uses the maze module (in file maze.py) if you want to add an algorithm, take inspiration from the 5 algorithms I've already coded, it shouldn't be too hard to add some compatible ones it is also possible to choose the thickness of the lines, the size of the squares and the size of the labyrinth (in number of squares). The result will be displayed in black, in a group containing all the paths. And you can then easily manipulate them for all questions, comments, bugs: duvillard.tiemen@gmail.com this extension is under licence MIT @ Tiemen DUVILLARD 2020 EDIT : 27/05/2021 : New Version, with a new Algorithm 18/03/2024 : Solve bug with 1.3.2
Comment here...
Slic3r STL Input
Mario Voigt
STL Sliced Import (by Slic3r). Supports OBJ/OFF/PLY/STL as input file formats. How it works: - projects an STL file on the X-Y plane by cutting the objects into "slices" - each "slice" is a group of polygons, with a label indicating its z position - the polygons are converted to paths for better editing in inkscape - use Object → Rows & Columns → distribute the slices in a grid Warning: Requires Slicer 1.3.1-dev (the really latest build possible) docs: https://stadtfabrikanten.org/display/IFM/Slic3r+STL+Input based on stl input extension of Jürgen Weigert. Thanks for your hard work.
Comment here...
DXF/DWG Importer
Mario Voigt
Import any DWG or DXF file using ODA File Converter, sk1 UniConverter, kabeja, ezdxf and more tools. Made for Linux and Windows Please carefully read the comments in GUI and docs -> https://fablabchemnitz.de/pages/viewpage.action?pageId=78807535
Comment here...
Tabgen 3D Papercraft Extension
Sue Zakar
Tabgen Papercraft Extension for Inkscape 1.1 by Obzerving Use the tabgen extension to add tabs on pieces for assembling papercraft projects. Please read the important setup info below. After installing, it is available under Extensions->Papercraft->Tabgen Using it is very simple and straightforward. Select the path that you want to put tabs on. Run the extension. It will generate a new piece with tabs along the outside edge, and/or any enclosed path (i.e. along the inside of cutouts.) The tabs have scorelines. The path MUST contain only straight segments, as tabs cannot be generated on curves. Every segment will create a tab, so eliminate stray nodes. New version allows for selective tab placement. Options/Parameters The angle of the tab is the angle used at the edges of the tab. The height of the tab is how far away from the path the tab extends. The length of the dashline is how large any one cuts making up the score line is. Making this number too large may result in missing score marks. If zero is used, the score line will be solid, and will not be part of the path, but will be a separate path grouped with it. The choice for tab placement are outside, inside and both. This affects whether tabs are placed along the outer path, inner paths (holes), or both. Dimension units are the units in which you specify your setting for height and length. Keep this consistent with your document parameters.
Comment here...
Paperfold
Mario Voigt
Paperfold is another flattener for triangle mesh files, heavily based on https://github.com/felixfeliz/paperfoldmodels by Felix Scholz aka felixfeliz. Possible input files are STL, Wavefront OBJ, PLY and OFF. To run this you need to install OpenMesh with python pip. The algorithm of paperfoldmodels consists of three steps: - Find a minimum spanning tree of the dual graph of the mesh. - Unfold the dual graph. - Remove self-intersections by adding additional cuts along edges. Reference: The code is mostly based on the algorithm presented in a by Straub and Prautzsch (https://geom.ivd.kit.edu/downloads/proj-paper-models_cut_out_sheets.pdf).
Comment here...
Polygon Side
inklinea
Creates a polygon with a given side length. Should work for user units (mm, in) or pixels. Also creates arc circles with n-nodes Circles with less than 4 nodes will be corrected ! Appears under 'Extensions > Render > Polygon Side' 31.07.22 - Update to correct polygon orientation
Comment here...
NextGenerator (Replace & Export)
Maren Hachmann
Automatically replace values (text, attribute values) in an SVG file and export to various file formats. This extension is useful e.g. for generating images for name badges and other similar items, or for rotating object colors in a semi-automated way. Data must be given as a CSV (comma separated values) file. The extension is compatible with Inkscape starting from version 1.2 and requires Python 3. Visit https://gitlab.com/Moini/nextgenerator for downloading the latest version, finding a set of examples, and some additional usage hints and to report bugs.
Comment here...
Inkscape Tiling Extension
Chris Want
An extension to make tiling patterns, with or without color patterns. It can be found under the menu Extensions-->Render-->Tiling. This extension uses the Tessagon library (a minified version of the library is included): https://github.com/cwant/tessagon If you would like to try out new features still in development, you can checkout the development branch of tessagon (above) or download a zip file: https://github.com/cwant/tessagon/archive/refs/heads/development.zip Running the script integrations/inkscape/package_extension.py will package up the extension (both as a directory and as a zip file in the output directory that the package_extension script is in).
Comment here...
Sashiko Stitching Patterns
FractalLotus
Sashiko is a type of Japanese hand embroidery. It was developed over centuries by poor folks patching their clothes. It has become an artform. This extension creates some of the patterns. You can choose the size of the area covered by choosing the number of rows and columns to fill.
Comment here...
Apply Transforms
Mark Riedesel
An Inkscape extension which recursively applies transformations to shapes. Note that performing this operation on certain shapes (stars, lpes, ...) will convert them to paths, and clones are affected in strange ways due to the way that clone transforms behave.
Comment here...
Make Page Tileable
Scott Pakin
Make Page Tileable clones all objects that straddle an edge of the page to make the page as a whole tileable. This can be useful for making background patterns for webpages, textures for games and raytraced scenes, tiling patterns for autostereograms, and other places where seamless repetition is desired. To run the extension, simply select Extensions → Page → Make Page Tileable. If no objects are selected then all objects on the page will be cloned. Otherwise, only the selected objects will be cloned. Each set of clones is placed in a group so their positions can be adjusted in unison.
Comment here...
Render Gear Pair
Abhijit Karnik
This extension extends the existing 'Extensions>Render>Gear>Gear' and renders a pair of gears based on the settings selected. This is aimed to help render pairs of gears which will be laser-cut. The extension can render gear pairs based on the distance between the shaft centers (D), or a fixed circular pitch (CP) for a fixed number of teeth on each gear. It can also render a gear pair using a combination of D, CP and gear ratio (GR) to generate a 'best-fit' tooth count. The modified parameter is added as text for future reference.
Comment here...
Paste Length Effect
Khemadeva .
This effect makes the length of all the destination paths the same as that of the source path, while maintaining their shapes. The source is the topmost path in the selection. Quick introduction: https://youtu.be/L7Z48mZlhV0 Please see: https://github.com/Shriinivas/inkscapepastelength for downloads (ed.)
Comment here...
Csv Fun
inklinea
csv fun Appears in Extensions>Text Inkscape Extension - ** Requires Inkscape 1.1+ ** Nothing exciting, just very basic csv importing Would recommend quoting all values in the export options of Excel or Libreoffice Calc.
Comment here...
Inkscape Grids
Patufet
A set of routines to produce grids with multiple layers of subdivision. Line thickness and color can be specified for each level of subdivision. The grid size can be specified in any desired units. The three grids are Cartesian (rectangular), Triangular (the angle is adjustable), and Perspective (2-point perspective with adjustable perspective points). Re-released, original version: https://inkscape.org/~cds4/%E2%98%85multi-grids --- Reviewed by Martin Owens on May 12 2021 8:06 PM pytest coverage: 20% pylint score: 5.5/10 Tested in Inkscape 1.1, three extensions.
Comment here...
Remove Empty Groups
Mario Voigt
This extension is totally minimal. It will just clean the whole document from groups without content (dangling groups). That usually happens if you have a group but remove it's paths for example. The group will possibly stay in the XML tree. This also applies for layers because layers are just special types of groups.
Comment here...
Inkscape to povray exporter
Paco García
This new version of the script in python for inkscape adds the option to export as lathe for povray, draw the bezier curves handles and only for windows the option to save all macros in a .inc file within the includes directory of povray. More info and download from http://www.arakne.es/en/dessign/inkscape-svg2pov-new-version-export-as-lathe/ Updated version of the extension: http://www.arakne.es/en/uncategorized/inkscape-svg2pov-updated-svg2pov-extra-properties/ and step by step tutorial in http://www.arakne.es/en/dessign/svg2pov-tutorial-table-part1/
Comment here...
Draw Ratchet
kie27
Ratchet maker. - creates a ratchet with variable number of teeth - variable inner and outer diameters and an inner hole if required notes: extension requires perl tested and working on linux should work on other platforms but not tested version 0.1
Comment here...
CardCarton rev.1
Andrew Sinclair
This Inkscape extension draws carton containers intended for plotter or dieline cutting and creasing. This is release one; thus, it is a proof of concept that developed while exploring the potential of Inkscape's extensions framework. In this version, under Job Settings --> General --> Drawing Diagnostic, I have implemented an experiment titled. "Closure." This allows one to see what the clip lock lid design would look like when assembled as opposed to being flat. I later intend to use this same feature to tidy up the trash-lock base, to make sure it holds together when assembled. Then it will be a real crash-lock, not a quick and dirty imitation trash-lock.
Comment here...
App Icon Generator Extension
Carlos Vazquez
This extension allows you to export icons created in inkscape to all the necessary sizes for iOS and Android applications. This extension still has a lot of room for improvement. If you want to help out, feel free to check out the project on Github: https://github.com/ScreamingTaco/inkscape_app_icon_generator Feature requests, pull requests, issues, and any other contribution welcome. --- Curated by Maren Hachmann on April 11 2020 2:11 AM
Comment here...
Tableau
FrankI4466
inkscape-tableau ----- Version 2024.1 For inkscape V 1.x ==================== Draw simple table with or not rounded corner. Optimized for laser cutter. Usage ----- Copy the .inx, .svg and *.py files into your Inkscape extensions directory (usually on windows C:\Users\username\AppData\Roaming\inkscape\extensions). The actual directory can be found under Preferences/System. Restart inkscape. The table will be available under Extensions/Tableau. All code is offered under Licence : Public Domain. Translated in english. If you translat it in other language, please send me the pot file. Question possible en français.
Comment here...
Inkscape Multicalendar
Rania Amina
Multicalendar is extended version of svgcalendar from Aurelio A. Heckert (2008). Upstream version already included in inkscape release as main extension (see changelog). The aims of this fork is to add new features, such as Hijri Calendar, Local Calendar (Javanese), update UI and more. Requirements - inkscape 1.0 - python >= 3.6 How to Install? just copy the .ink an .py file into inkscape user extensions folder (usually located in $HOME/.config/inkscape/extensions) Cannot find your inkscape user's extensions folder? Check Edit > Preferences > System > User Extensions Multicalendar also available in Gimpscape PPA: https://gimpscape.github.io/gimpscape-ppa/ How to Use? Open this menu: Extensions > Render > Multicalendar
Comment here...
AndroidVector
owenfromcanada
Stop exporting dozens of PNGs for your Android app -- this extension adds a new save as type for Android vector drawable resources. Once installed, select save as or save a copy, and you should see a type called Android VectorDrawable (*.xml) in the dropdown list. Check the README file (or see the external link) for usage and limitations. 2017-02-14: updated to remove scientific notation for older versions of Android.
Comment here...
polarAxes2D
fsmMLK
Inkscape extension to assist creating 2D polar axes main features: - linear and log10 scales in R direction - optional grid lines in R and Theta directions - adjustable tick mark intervals and sizes - LaTeX support, thanks to texText from Pauli Virtanen (https://pav.iki.fi/software/textext/)
Comment here...
Batch Export
Stefan Traistaru
An extension for Inkscape that will help you export your artwork easier: - Export each layer as a separate file. - Choose which layers to export. - Configure background layers. - Export based on layer hierarchy. - Automated file naming. - Supports multiple export file formats (SVG, PNG, PS, EPS, PDF, EMF, WMF, XAML). Please visit the Github repositoy for a more detailed usage description. https://github.com/StefanTraistaru/batch-export [LAST-UPDATE]: 12-September-2021 - Fix: Possible crash when Inkscape throws lots of warnings on the export process.
Comment here...
Simple Frame
inklinea
Simple Frame - Create frames around selected objects - Inkscape 1.1+ Appears Under Extensions>Render>Simple Frame ▶ User choice of margin units ▶ Style can be copied from last selected object ▶ Inkscape 1.1+
Comment here...
Dxf2papercraft
Mario Voigt
Unfold and import DXF into InkScape using dxf2papercraft. This is some kind of wrapper extension utilizing kabeja to convert the dxf output from dxf2papercraft into SVG. To make it work you need to install at least java. Works on Windows and Linux. dxf2papercraft itself is a tool to make flattened 2D output from a 3D DXF file. Note that kabeja and dxf2papercraft are really old tools. There might be a lot better solutions out there but this is a good starting point and it basically works :) You might have a look at https://inkscape.org/~MarioVoigt/%E2%98%85dxfdwg-importer and https://inkscape.org/~MarioVoigt/%E2%98%85inkscape-papercraft-unfold-stl too.
Comment here...
Jitter Gradients
Ken Vermette
Inkscape extension, take a large selection of elements with gradients and randomly move their endpoints. Ideal when working with a large number of tiles, placing a large overarching gradient, then jittering to add texture. Still extremely basic, over time I expect to add more options and improve the overall quality of the extension. Update: This plugin has been updated for Inkscape 1.0+!
Comment here...
Ids to text elements
whidev
A simple Inkscape extension that lets you extract attributes (like id) from all selected paths, and show them as <text> elements inside the paths. Useful for when you want to have all paths' id shown on the SVG document as <text> nodes. You can also use it for other path attributes, like `label`, `fill`, `stroke`, `width`, `height`. Available under the Extensions > Text submenu. Check the extension's repo on GitHub for examples. Options for styling and formatting the text: Font size in pixels Color (the fill color of the <text> elements) Font (should be installed on the system) Font Weight (should be supported by the selected font) Angle (controls the rotation of the generated <text> elements, in degrees) Options for further editing the extracted text (only used with id and label attributes): Text to replace (a simple replace function to remove characters you may not want from the text) Match Regular Expression (matches the extracted text of each path to a regular expression and uses the result on the path, e.g. if the id is `Province_055` and this field `\d+`, the text on the path will be just `055`) Capitalize (capitalize all text) Group paths with the generated text elements (if checked, also group the path with its text label) Note: only works on <path> elements. If you have a <circle>, <rectangle>, <text>, etc., first use Object > Object to Path to convert it. For Inkscape v0.92 and before, you should check the extension's repository on GitHub.
Comment here...
Papercraft Unfold
Mario Voigt
This tool converts a STL/OFF/PLY/OBJ into binary STL Format. The STL then gets unfolded (flattened) to make a papercraft model. It utilizes https://github.com/osresearch/papercraft and https://github.com/admesh/admesh Documentation: https://fablabchemnitz.de/display/IFM/Papercraft+Unfold
Comment here...
Origami Patterns
evbernardes
Inkscape extension that creates parametric origami patterns, while easily being able to select different kind of stroke styles for different types of folds/cuts. The emphasis is on making it as simple as possible to implement new patterns, and to either print it to fold by hand, lasercut it or test it on origamisimulator.org/.
Comment here...
Selection Plus
inklinea
A dbus based inkscape selection passback extension ** Appears Under - Extensions>Arrange>Selection Plus ** Gives a few extra selection options: - Xpath selection - Path lengths / node count / path area - Bounding box ( width / height / diagonal / area / width-height ratio / height-width ratio ) - Some selection order sorting for the above - Colour selection - ( limit / range / distance ) ---------------------- 25.03.23 - Correction for typo in combined paths detection 07.04.23 - Now updated to include a simple visual lasso tool (similar to that in photoshop or gimp). Appears under Extensions>Arrange>Ink Lasso ----------------------------------- 130524 - Should be fixed for Inkscape 1.3 now :)
Comment here...
GuillocheExtensions for V1.x
DrWiggly
The Guilloche extensions for use with Inkscape v1.x. Includes several tests to try out the extensions on your computer.
Comment here...
Clip Out
inklinea
Clip Out Inkscape Extension to clip a background image by object outlines then export to multiple png. Supports: Exporting individual clipped objects ( normal and inverse ) Export master of all clipped objects ( normal and inverse ) Cropping to resulting image size, or exporting to background image size. Appears under Extensions>Export Requires Inkscape 1.1+ --> The image to be clipped must be the last selected. An easy way to do this, is select all then shift & left click the image twice to make it the last selected. It does require that you have saved our svg file at least once before using ( will not work on an unsaved svg ) ----- 10.03.22 - bug fix ----
Comment here...
Stroke Color As Fill
Jabiertxo Arraiza Cenoz
Basicaly get the color fill and add to the stroke. and inverse. Also has an optional alpha. For <= 0.91 you can uncomment line 19 to allow markers without strokes in inkscape <= inkscape0.92-prerelease3. The video play with diferent based features like create Delaunay from any draw in two easy steps(use the extension at the end to allow fix gap between triangles) and play with markers and custom markers. New version -0.2- highly based on the work of suv (made a similar and beter extension previously)
Comment here...
Rounder 0.4
Jabiertxo Arraiza Cenoz
Menu "Objects->rounder" Round internal SVG data to a fixed decimal positions. Added options to also round stroke width X ,Y, Width and Height. Added options to round opacity. Fix some warnings. 0.4 Added option to round to 0.*5
Comment here...
Chipscratches
Andrew Kurn
This extension creates visual noise of various kinds, using 3 ingredients, scratches, chips, and specks. Extensions -> Generate -> Noise -> ChipScratches The 3 ingredients go into 3 Inkscape groups. Where they are in the tree is controlled by the object selected at the time the extension is called. They become sisters of the selected object, under the same parent. If there is no selection, they go to the root level. In the text below, each * indicates a settable parameter in the pop-up box. The extension fills a rectangle, which defaults* to the page size, or is width* by height*. The overall size* and number* of marks is set. However, for each of the 3, a multiplier changes the size* and number*. To get the overall value, just set the multiplier to 1.0 Also, each of the 3 may be separately enabled* or disabled. For each ingredient, it is possible to set the size to grow* with y. For this case, it is possible to set the size to a negative multiplier, so that it, when growing, will pass through zero somewhere in the middle of the box. For scratches, it is possible to change their orientation from vertical to angular*, radiating from the center of the box. (If so, growth is measured from the center.) The initial angle* and the change with distance* are set. For chips and specks, there are similar controls, except the angular ones, which are omitted. Last, there is the option to use a density gradient*. In the simple case, the probability of making a mark is the same everywhere. With a gradient, it changes from 0 to 1 across the box from left to right. -- Some of the features above may be of little use, while some omitted ones might be important. This is a beta version, so I await user feedback. I notice that the extension might take 5 seconds to run. Is this important? A bit of clean-up might help this. Two features that might slow it down considerably are clusters and collisions. Collisions, if implemented, would keep any 2 marks from landing on top of each other. Slow, because each mark must search all the previous marks. Clusters is some method of putting new marks near old ones. I think this would be especially useful for specks, which could be clustered around the end of scratches. Right now, they're uniform, and so fade into the background. Again, feedback? Technical note: This file may also be used to generate the inx file. (The bundled inx file was generated this way.) Set the global /inxGen/ =1 and run the file stand-alone. - AK Sept 2018
Comment here...
Indexed Colour
inklinea
Indexed Colour - a simple Euclidean colour distance setter Colours can be taken from ▶ Web safe SVG 1.1 palette ▶ .gpl - Gimp palette files ▶ First selected gradient ▶ All gradients contained in document ▶ Colours which appear in bitmap image (via PIL) ▶ Can create square sample swatches for the palette ▶ Euclidean colour distance can be weighted ▶ A bit slow for svgs with large object counts ▶ Does not recolour gradients ▶ Inkscape 1.1+
Comment here...
Custom rounded corners rect
Mois Moshev
Ever wanted to make some of these fancy folder flap top-side only rounded corners? Or rounded corners with different radii? This extension allows the user to draw a rectangle with rounded corners as a path, specifying each corner's radius, in css order. It also provides an option to remove the selected rectangle when it's done. === Installation Use the included setup.py script: python setup.py install This will copy the necessary files to your extensions directory: * Windows - %APPDATA%\inkscape\extensions (e.g. C:\Users\User\AppData\Roaming) * Linux - $HOME/.config/inkscape/extensions === Usage Select rectangles in the document, in the menu select Render->Custom rounded corners rect. === License GPL-2.0
Comment here...
Circle Clones
Aurélio Heckert
This script create a circle of clones around each selected element, using --ray as the distance of the object center to the clone center. Each clone is rotated (360/--num-clones), making all bottom sides to point to the center. Now support "ray length unity".
Comment here...
Parametric SVG
Frank
This Extension allows you to embed a python script in the svg document, in that script you can define vars and functions (any python code really)... Then you can create parametric attributes in your svg objects. a parametric attribute is an attribute prefixed with parametric namespace, this attribute can contain any valid python expression which will be evaluated by this extension and the result will be set to the real attribute (without namespace) for example: # Import utilities from pyscript import svg import math # Simple rotation # 1. Get the Element element = ink.select_first('#arrow') # 2. Parse the element path = svg.PathObject( node = element ) # 3. Rotate path path.rotate( math.radians ( 30 ) ) # take into account inkscape inverted coordinate system # 4. Update element path.commit() Project page: https://gitlab.com/mnesarco/inkscape-pyscript
Comment here...
Path To X Y
Christian Hoffmann
Converts the enpoints of a path in csv-data. Create a rectangle around the path. Select the path and the rectangle (Shift+Click) then start the extension. Type in the upper and lower values for both axis.
Comment here...
Group to Layer
Rania Amina
This extension is owned by stuart@pernsteiner.org and as written in python file, everyone allowed to modify as long as comply with the provisions that have been determined. So, we modify this extension in order to make Group to Layer Extension can running well on Inkscape 1.0.
Comment here...
Objects To New Layer
inklinea
Objects To New Layer - An Inkscape Extension Inkscape 1.1 + ▶ Creates a new layer and copies or transfers the selected objects to that layer ▶ Appears in 'Extensions>Arrange' ▶ A shortcut can be used to org.inkscape.inklinea.objects_to_new_layer.noprefs ----------------------------- 10.02.22 ----------------------------- Some updates and corrections for preexisting layer transforms. ----------------------------- 06.10.22 ----------------------------- Added z-order pasting sequence support. This allows the objects currently selected to be pasted according to a sequence you choose. For example if you have 3 objects selected: Typing 1,1,1,2,2,3 would paste 3*object 1, 2*object 2 and 1*object 3 in that z-order.
Comment here...
TexText
jcwinkler
TexText allows to add and re-edit LaTeX/ XeLaTeX/ LuaLaTeX/ typst generated SVG elements to your drawing. A fully functional LaTeX distribution and or typst installation must be installed on your system! Most recent version is TexText 1.10.1 from 2023-11-19. It is compatible with Inkscape 1.3.x. For Inkscape 1.2.x, 1.1.x, and 1.0. goto https://github.com/textext/textext/releases/tag/1.8.2 Extensive installation instructions and extension documentation can be found at https://textext.github.io/textext For manual installation from this site: Download TexText-1.10.1-Inkscape.zip and place its content (i.e. the folder textext with all its files inside) into the Inkscape extension directory. Or load the zip-file via Inkscape's extension manager (experimental). Sourcecode and bug reports: https://github.com/textext/textext This extension is a direct continuation of the discontinued TexText 0.4.4 developed by Pauli Virtanen (https://pav.iki.fi/software/textext/)
Comment here...
Purge Short Lines
Christina Eneroth
This Inkscape extension lets you delete lines shorter than a given threshold. The extension was made to clean up heavy PDFs exported from SketchUp, but can probably be used in various other situations too. *Install* Copy the content in src/ into your Inkscape extension directory. The extension directory path can be found in Edit > Preferences > System inside of Inkscape. Tested in Inkscape 0.91 and 0.92 on Windows 7 and Windows 8
Comment here...
logicGates
fsmMLK
Inkscape extension to assist creating logic circuits symbols, following the 'distinctive shape' of IEEE Std 91/91a-1991 standard. The main features are - you can use up to six inputs for each gate (except NOT gate) - each input can be set to be inverted (negated) - signal labeling generator with a few commonly pre defined signals - Boolean expression editor, with optional LaTeX support and pre defined logic operator functions. ----NEW--- - Added latches and flip-flops
Comment here...
Simple attribute editor
MatheM
Collection of extensions useful for bulk editing of element attributes. Menu location: Extensions > Attributes Edit Attributes Edits attribute on all selected elements. Available edits: - set sets new value of attribute (adds attribute if necessary) - append adds new value to the end of current value of attribute - prefix adds new value to the beginning of current value of attribute - subtract deletes the given value string from current value of attribute - remove deletes attribute of given name Import Attributes imports attribute values from given text file. Lines in the file must be in format 'elementId,attributeName,value'. Malformed ids will be skipped, malformed attribute names will cause an error. Remove Obsolete removes attributes sodipodi:absref, sodipodi:docbase and sodipodi:docname from the document. These attributes contain absolute paths to resources which can pose a security issue. Inkscape will sometimes re-generate those attributes.
Comment here...
Art PNG Export
Martin Owens
Remove anti-aliasing artefacts in Inkscape 1.2 by using this extension to use the correct anti-aliasing settings, color modes and down-sampling algorithm to produce to nicest results for adjacent shapes. In SVG, adjacent shapes are rendered sequentially. When antialiasing is enabled, this process creates very small gaps between shapes which are actually touching each other. All renderers of SVG, including browsers and other art programs have this effect since it's built into the way shapes are rendered. But there is a way to get a good output, and that is to do the anti-aliasing step after rendering, by resizing the image down. Your images will be 4x smaller when using this extension so you should account for that when exporting. But should remove all anti-aliasing artefacts. If you still see gaps, your shapes may not truly be touching. This extension only works with Inkscape 1.2 raster extensions.
Comment here...
Simple Registration
inklinea
Inkscape Extension, simple registration marks across objects. Possibly useful for bitmap scans or printing Inkscape 1.1+ Appears Under 'Extensions>Render>Simple Registration' 08.10.21 - Added correction for existing layer transforms. 09.10.21 - Text label toggle off
Comment here...
Inkscape Fillet and Chamfer
taoari
This extension implements the Fillet and Chamfer function for inkscape described as http://launchpadlibrarian.net/12692602/rcp.svg.
Comment here...
Parabola
Reginald Waters
Parabola is an Inkscape extension that renders a series of lines in selected shapes to form an optical illusion of a curved line (Parabolic lines) Shapes available are: * Square * Cross * Triangle Output is an object made of a series of editable paths. See the github for documentation and example output: https://github.com/opensourcebear/inkscape-extension-parabola This extension was tested on: MacOS Big Sur running Inkscape version 1.0 Ubuntu Linux running Inkscape version 1.0.1 Windows 10 running Inkscape version 1.0.2 *Updated 2/28/2021* ============================================== Version 1.1.0 changes the border behavior. The border will now only be drawn along the edges of the corners selected to be rendered. Previously it would draw the entire shape border when the border option was selected. ==============================================
Comment here...
inkscapeMadeEasy
fsmMLK
This set of python modules aims to extend Aaron Spike's inkex.py module, adding functions to help the development of new extensions for inkscape. Here you will find methods and classes to deal with drawing elements, line and text styles, line markers, texts, cartesian and polar plots, etc. This project is not intended to provide an end-user inkscape extension by itself but to provide easier backstage functions and classes to facilitate the development of inkscape extensions. It is a work-in-progress project and new features will be added in the future.
Comment here...
Funshapes
inklinea
Funshapes. Requires Inkscape 1.1+ Just a very simple extension to test if Gtk3 Gui works well for simple extensions. Gtk3 based preview window with slider. The extension appears under Extensions>Render>Fun Shapes
Comment here...
Speira
panos
The extension help draw spiral of Archimedes. Base of equation R=r+(a * th) with feature :length of spiral
Comment here...
Move Path Node
Mario Voigt
Extension to change starting node of a path and visualize it by dots and numbers Notes: Use "Path → Reverse" to change path direction Use extension "Chain Paths" to make closed paths out of segments. Docs: https://stadtfabrikanten.org/display/IFM/Move+Path+Node
Comment here...
Clonesp
Andrew Kurn
This is an Inkscape extension that clones an object. It makes multiple clones that shrink toward a vanishing point, necessary for a perspective drawing.
Comment here...
Inkscape2laserGRBL
erichVK5
A simple extension that exports paths as g-code compatible with cheap GRBL 0.8c based laser cutters. The laser control is simple on/off. Minor typo fixed 18/08/2020.
Comment here...
Set CSS class extension
Mois Moshev
This extension sets a CSS class on elements selected in Inkscape, and optionally clears their inline styles. Works well in conjunction with "Merge Styles into CSS".
Comment here...
Place randomly
Philipp Doe
Randomly place an object once or several times along a path. --- Curated by Maren Hachmann on May 20 2018 9:29 PM Added tags
Comment here...
Older DXF R12 extension for plotters, Pure Python version
Martin Owens
Taken from http://mydxf.blogspot.com/2008/11/inkscape-r12-dxf.html and fixed to work with the latest inkscape (0.92.1)
Comment here...
createMarkers
fsmMLK
Inkscape's extension to assist creating new markers with custom shapes and colors. The main features/advantages are 1-) It is a convenient way to produce predefined markers you use very often. Right now, there are just 3 predefined types (dot, arrow1, ellipsis), but this number can grow fast if people ask or expand this extension. If you have some basic skills on python scripting, you can easily add your own predefined markers. 2-) It is possible to quickly control maker colors (both filling and stroke). It is a nice way to control marker colors, specially in 0.91 since Inkscape forces the marker color to match the line color. 3-) Easy control over its scale with respect to the line width. By using the standard 'Object->Object to Marker' present in Inkscape, you would need to make several copies of your custom marker, with different scales, and proceed with a try-and-error approach to find the appropriate scale. 4-) It is a convenient way to modify/redefine a marker in your document. You just have to use the same nameID and configure the extension to overwrite the old definition.
Comment here...
Icon Export
inklinea
Icon Export Some Simple Icon Exporting Appears under Extensions>Export>Icon Export ▶ Batch exporting of .ico and .png ▶ Choice of padding / stretching or not ▶ Inkscape 1.2+
Comment here...
Pathpoints2dots
Christian Hoffmann
Markiere zwei Objekte. Das zuletzt markierte Objekt wird auf die Punkte des Pfades des ersten Objekts kopiert. Select two objects. The last one represents the symbol for the dot. The symbol will be copied on the path points.
Comment here...
Create Iconfile
McHansy
An extension for Inkscape that export a drawing to a icon file
Comment here...
IFS fractal rendering extension
dylex
Simple extension to render IFS fractals from a base image, by repeatedly duplicating and transforming selected objects. Transformations are specified as matrices, and should be contractive (i.e., shinking). This can potentially make a large number of objects, but for a small number of iterations and transformations the results should be reasonable.
Comment here...
Offset Paths
Mario Voigt
Create offset for open or closed paths. Python library "pyclipper" needs to be installed. Use "Flatten Bezier" extension in advance of this plugin. Docs: https://stadtfabrikanten.org/display/IFM/Offset+Paths
Comment here...
Triangle Pattern Mapping
Clara_Kang
The extension maps a pattern from a boundary triangle to others using affine mapping
Comment here...
export_gif
prof milki
Generates a GIF slideshow from image layers ☰ (Shift+Ctrl+L). The menu option Extensions➔>Export➔GIF-slideshow… iterates over layers to generate animation slides. They get merged from bottom to top. Depending on shape overlap or layer transparency, there's different usage modes: 🞂 With a solid background in each layer, there's no accumulation to take care of. 🞂 Alternatively elect layers` can be labeled as [background] to stick, or [fixed] as permanent foreground, or [merge] for down-grouping. 🞂 If the -layers option is composite/coalesce/merge then all lower layers remain visible until the current frame. 🞂 Any [animate] layers get interpolated as is, layer transparency preserved. Requires ImageMagick installed; fit for standard Linux setups. But might work with convert.exe on Windows. And alternatively there's the builtin Pillow conversion method. The options mostly map to IM flags. 🞂 Without the PNG conversion step, SVG interpretation is up to Imagick, and will not render fancy font/path effects. Just for plain old SVGs. 🞂 The [PNG→Pillow] option works without ImageMagick, but often generates rougher GIFs, yet might produce smaller result files. 🞂 In [JavaScript] mode, no output file will be generated. It just adds a script for animating slides into the current document (web views). 🞂 A [fixed] layer label describes a permanent foreground (until overdrawn), but never constitues a frame. Whereas [background] layers only become active and permanent when its frame is reached. Additionally [merge] labels will enjoin partial layers to the preceding full slide. But also [exclude] to omit layers entirely. 🞂 There's also a rudimentary [animate=5] option to craft subframes from embedded <animate*> instructions. 🞂 Each layer label may also specify ImageMagick flags [--delay=2.5]. 🞂 The "default background color" is useful for otherwise transparent layers. Half-transparancy can be useful to gradually fade out lower frames (only seems to work in SVG/ImageMagick -displace mode). 🞂 Extra arguments are just a list of sample options, might not be particularly useful by themselves. Use the second input or [--flag=X] labels for more refined combinations. 🞂 Can't run two instances in parallel, due to fixed /tmp/inkscape… dir 🞂 It's also available as File > Save As... option (fewer options). 🞂 Tested on Inkscape 1.2 (2022-05-xx) and 1.3-dev (2022-09-xx) Might require some experimentation, and heavily utilizing the preview option. Potential error popups become informative at the very end. Code is derived from Xavi's "Export Layers Redux For Inkscape 1.1+". <https://inkscape.org/~VagabondArcade/%E2%98%85export-layers-redux-for-inkscape-11> ZIP contains the `pmd2inks` command-line tool to ease extending the options dialog (using the <https://pypi.org/project/pluginconf/> format). While the DEB package bundles the new animate_yo extension. v1.0 · more animation support, redesigned dialog v0.9 · add [merge] grouping, preliminary animation support v0.8 · support per frame [--options=xyz] and [exclude] v0.7 · introduce combined modes · JavaScript embed option v0.6 · support file→save-as invocation v0.5 · revamped layer combination handling v0.4 · support SVG export by removing nodes v0.3 · introduced more imagemagick options v0.2 · migrated to plugin meta data · more robust file handling v0.1 · prototype
Comment here...
Inkscape to povray
Paco Garcia
svg2pov is a script for inkscape developed in python that exports svg paths to povray, the paths with stroke are exported as a series of cylinders and spheres with a radius equal to that established in the svg, the paths filled are exported as prisms objects. The border and fill color the are established in the svg file, including those with linear or radial gradients.
Comment here...
DXF calibration frame for Silhouette Studio
Ellen Wasbø
Silhouette Studio Basic Edition can not open SVG files, only DXF. The scaling of the design is lost when importing the DXF file. Adding a frame around the design matching the size it will be forced into when imported to Silhouette Studio will cause the scaling to be kept. For a quick way of doing this I created an extension with the option to add a frame matching the 8x12in or 12x12in cutting mat and media size in Silhouette Studio. More details on how this works in the Link.
Comment here...
BodePlot
fsmMLK
This extension will assist you creating Bode plot of rational transfer functions in Inkscape. The main features of this extension are Both continuous and discrete time systems are accepted The input is the coefficients of the rational transfer function H(s) or H(z) adjustable frequency units Gain plot in linear, log10 or dB scales Phase plot in degree or radians Optional zero/pole plot Optional LaTeX support --- Curated by Maren Hachmann on April 26 2021 2:39 PM
Comment here...
Inklin
inklinea
Inklin - a collection of things I 'ave an inkling might be useful to someone. Requires Inkscape 1.1+ Extract the zip into your extension folder. Contains 3 files, inklin.inx, inklin.py and inklin.glade (menu file) Appears in Extensions > Render > Inklin 080721 --------------------------- Currently just contains a polygon arc generator. Creates polygons with arcs as sides instead of straight lines.
Comment here...
VCard QR Code generator
Сергей Ведерников
QR Code generator for VCard (a format standard for electronic business cards. A common use case it to place the code on a business card so the details are easily added by phone QR Code scanner software. ou can also Extract and put files from archive to your Incscape extension folder (C:\Program Files\Inkscape\share\extensions), restart (start) Inkscape and go to "Extensions->Render->Barcode->QR Code VCard..." Simply fill all needed fields, choose QR Card size (Auto, if you don't know), error correction level you need, select input codepage (your operational system codepage) and output codepage (usually, UTF-8) and press Apply button. You can check your QR Code by any QR Code scanner software by you smartphone. Enjoy!
Comment here...
Inkscape Ocr
amalsan
Extension helps in reading text from imported inkscape images Compatible Platform : Debian Requirements: install.sh
Comment here...
Book Art
Kaalleen
Create cut and fold book art patterns How To Use The Extension ======================== First import or create your design and scale it to the correct size. Open Extensions > Generate from Path > Book Art ... Set parameters as necessary, here the important ones: * number of pages (start page, end page) * book height * line distance for your convenience * font size * units Click on apply How to cut and fold your book ============================= Print the pattern and prepare your tools: * book and the printed pattern * pencil * ruler or triangle ruler * scissors Now draw two vertical lines on every page of the book: * cut line: to where you cut * fold line: to where you fold Use the pattern to mark the cut points. Cut horizontally from the mark to the cut line. Then fold. You can either fold the pattern to the inside or to the outside to achieve a different effect. Follow the link to see an illustration on how this is done.
Comment here...
Color From Bitmap
ju mo
Grab color from underlying bitmap and apply it to path objects. The color is averaged all over the path area. Erode parameter can be used to shrink or expand (using negative value) this area. If multiple bitmaps are selected, only one is considered. In version 2.0, you can also alter the scale each path object. see source code on https://github.com/jujumo/inkex_color_trace
Comment here...
lirror
tgk
Inkscape extension for creating generative art. The scope of this extension has been kept very minimal. It simply takes the selected object(s) and creates the specified number of copies of it. Each new copy will have a cumulative transformation applied to it where each transformation consists of - a rotation around 0,0 (top left of the canvas), - a shift in x and y, and - a scale operation in x and y. The rotation and shift operation can be done either lineraly (the same amount for every copy) or by a sinusidal factor (oscillating for each copy). The source is available at https://github.com/tgk/lirror
Comment here...
Quick Export
inklinea
Quick Export - Quickly export Inkscape svg, plain svg, png, pdf and html5 canvas Inkscape 1.1+ This is not a replacement for saving or Inkscape autosave :) Appears at Extensions>Export ------------------------------------------------------ After setting the options in the main dialogue Assign a shortcut in Inkscape Edit>Preferences>Interface>Keyboard to: org.inkscape.inklinea.quick_export.noprefs For shortcut triggered quick export --- Not 100% sure where the PDF and HTML5 settings are pulled from, presume from last used save settings. ------------------------------------------------------ 21.01.23 - Added `text-to-path` options. Allows for all text objects to be exported as paths.
Comment here...
Inkscape artist signature
robinm3
# Inkscape Artist Signature An extension for Inkscape artists to put their name in their art >About This project is pretty new and for sure it's not perfect and has some issues, but I hope to make it better and for it to actually be useful one day. >Features For now, you can: - Choose your artist name - Choose text size - Choose text font - Select an image and choose where you want to put it on your image(there are options for each corner and the center) - Pick the color you want your signature to be in - Choose a social media preset that formats your name as this social media's username style >How to use ? 1. Download the zip file / clone the repository 2. Extract the zip 3. Put the two artist_signature files(the .inx and .py ones) in your inkscape extensions directory 4. Open Inkscape and you'll find the extension in >extension/artist 5. Select your image/drawing 6. Put your artist name, choose text size, text font and text placement. Change text color and social media too if you want! 7. Click apply. Done! You have your signature!
Comment here...
Round Corners
Jürgen Weigert
Apply a radius to sharp corners of a path. The extension is written for inkscape 1.0.1 (but also contains a backport for 0.92.4). Usage: The screenshot demonstrates the usage. In the upper half, a red path with 4 vertices is shown. We select two vertices: the top left and bottom left corner (shown in blue). Run "Rounded Corners" from "Extensions" -> "Modify Path". The result is the path below. (Viewed here in edit mode again to show all the new vertices.)
Comment here...
inkscape-placeholder extension
Xavi
Embed image placeholders with custom height and width into Inkscape: Beautiful Image backgrounds from unsplash Random User avatars from uifaces
Comment here...
ImageJ Macro Panel and other Figure extensions
Jerome
A set of Inkscape extensions which uses third party software like ImageJ, R, PyMOL and Processing to generate figure panel images from source code taken from the current rectangle or image object. Installation: Unzip to 'User Extensions' folder. History: 2023-07-28: thanks to Tim-Oliver Buchholz, directly specify panel DPIs for R and Matplotlib 2023-06-16: add matplotlib panels; fix coordinates for panel and lane labels; assessed 1.3beta compatibility. 2022-04-08: upload version compatible with both 1.1 and 1.2beta 2021-07-12: fix file separators on windows for R, PyMOL, Processing; work around call returntype for inkscape 1.2 2021-05-24: fix file separators on windows
Comment here...
Parallel Translation Extension
chris371
This extension allows parallel translations and alignment operations of selected straight lines. It has been written to help making a strange kind of paper cube with angles different to 90 degrees. It helps to align the faces together and to add complex folding flaps with lines in different colors to the edges. There are options to resize the length of the flaps so that they match the length of the edges.
Comment here...
Living Hinge Creator for Inkscape 1.0
drphonon
Updated for Inkscape 1.0 This extension creates cut lines to make a living hinge when laser cutting material. Options include the length of the cuts, the separation between sequential cuts, and the separation between adjacent cuts. All parameters are stored in the "Object Properties" field of the resulting object. Installation Download and unzip the file. Copy living_hinge.inx and living_hinge.py to your extension directory. --Linux Run the shell script copy_files.sh. This will copy living_hinge.inx and living_hinge.py to ~/.config/inkscape/extensions Instructions on how to use the extension can be found here: http://wiki.lvl1.org/Inkscape_Extension_to_Render_a_Living_Hinge
Comment here...
Line-us
Line-us
Line-us is a small internet connected robot drawing arm. This extension was developed by Anatoly Besplemennov to allow you to draw to Line-us directly from Inkscape. The plugin uses machine co-ordinates and does not do any scaling, so refer to the drawing space diagram (link below) for details. Note that the Inkscape document units must be set to pixels (File/Document Properties/Custom Size/Units). For reference a sample drawing is included in the links below. If you have any questions or would like to know more drop us an email at help@line-us.com Drawing space diagram: https://github.com/Line-us/Line-us-Programming/blob/master/Documentation/LineUsDrawingArea.pdf (Right click to save the file if your browser displays the content of the file) Sample Drawing: https://raw.githubusercontent.com/Line-us/Inkscape-Plugin/master/LineUsTestDrawing.svg
Comment here...
Blobs
Andrew Kurn
This extension creates a texture of blobs. Blobs are randomly scattered over a rectangle (user input). Individual blobs are randomly generated as described below. Inkscape v 0.92 on Debian Gnu-Linux. The pop-up has two tabs, Each and All. Each: Blobs are built starting with a number of (interior) points, in a Gaussian distribution. The (almost) convex hull is built and then (somewhat) smoothed with splines. In the above sentence, each parenthesis indicates an input parameter, called out in the pop-up "interior" "concavity" "bluntness". Also, "size of a blob" sets the /standard deviation/ of the distribution, so blobs are typically 3 times larger than the value. Bluntness = 0.3 makes pleasingly round, mostly convex blobs. 0.4 makes them more concave. 0.6 - 1.0 they're getting more and more pointy. 2.0 - 10. and they grow appendages like hot-air balloons. 0.1 makes the corners pretty sharp. 0.0 and it's down to the convex hulls that are the basis of the blobs, that is, polygons. Concavity goes from 0 to 1. 0 tries to be completely convex. Increasing the number allows more interior points to be used so the shape becomes more complex, as well as more branchy. All: The work area x,y values specify a rectangle in which to place the blobs. Their centers are restricted to this area, so blobs may spill outside it. Centers are placed randomly. Number of blobs. -- Blobs are on their own layer "Blob layer". There may be several.
Comment here...
Animate Yo
prof milki
Allows to add trivial <animate> tags to a SVG document. Embedded animations work for standalone SVG graphics. Some instructions are understood by the GIF interpolation in ★export_gif <https://inkscape.org/~culturaljuice/%E2%98%85export_gif> (which this was originally intended for). Usually requires selecting one object, invoking the module in Extension➜Animation➜Animate-Yo, and selecting one of the tabs to inject an <animate*> tag. The [move] option additionally requires a selected path (second argument) for transitioning the main object on. You can use Inkscapes´ XML editor (Ctrl+Shift+X) to expand the options (keyFrames also have partial support in export_gif now).
Comment here...
SVG Stencil Export
mipmip
SVG Stencil Export helps publishing stencils to https://svg-stencils.github.io. About SVG-Stencils.github.io ---------------------------- SVG Stencils is a community driven stencil library. This video shows how it works: https://user-images.githubusercontent.com/658612/160613837-4df9c606-9970-4608-9b86-e0069fb5ca66.mp4 Extension Features ------------------ - Exports each layer as component svg-file - Choose which layers to export. - Automated file naming. - Optionally creates a stencil-meta.json - Optionally creates a front page index.html - Optionally creates a README.md - Optionally creates a Github Pages Action configuration file - Optionally creates a Gitlab Pages CI configuration file HELP THE STENCIL LIBRARY GROW! ============================== Create and submit your own stencils. This extension helps you creating and publishing new stencils in minutes. Read the documentation here: https://github.com/svg-stencils/svg-stencils.github.io/blob/main/DOCUMENTATION.md Credits ------- The extension is based on Batch Export (https://github.com/StefanTraistaru/batch-export)
Comment here...
vpypetools - vpype for Inkscape
Mario Voigt
vpype is a command processor working with SVG files. It can do a lot of productive steps to optimize files for different purposes like pen plotting, laser cutting or the generation of creative artwork. vpype is really powerful and helps to extend Inkscape feature capability. vpype contains a lot of functionality which is included natively within Inkscape. The extension "vpype for Inkscape" does not deal with all features but with a set of important commands like linemerge, linesort, linesimplify, occult, etc. We can use it to shorten tool path lengths, remove hiddenlines and so on. vpype converts all elements into simple SVG elements like svg:line, svg:polyline and svg:polygon. They can be displayed properly in Inkscape, but they have no knot handles to edit (see https://alpha.inkscape.org/vectors/www.inkscapeforum.com/viewtopicb51d.html?f=16&t=32562). We need to convert those elements to svg:path using key combination CTRL + SHIFT + C ("object to path"; do not use "stroke to path" because it will duplicate your outline with inset and outset contours). Our extension allows to do this conversion automatically. Documentation: https://stadtfabrikanten.org/display/IFM/vpypetools
Comment here...
Zoetrope maker
Neon22
Zoetrope maker. - Prints disk of given diameter and number of images around the outside. - Also includes a pulse trigger ring to trigger a strobe. - Width and phase of the pulse can be defined. - Prints image references for paint programs. - Both distorted and undistorted - for use in a paint program to size/scale/distort the source inages to fit onto the Disk. Excellent Hardware to make a working Zoetrope can be found here: http://drehkino.de/3Drehkino_en.php Works in Inkscape 1.0
Comment here...
Multi-clip Image
Khemadeva .
This tool allows you to use multiple shapes as clipping regions to clip an image. Features include: Delete Selection: Optionally remove the clipping shapes after the operation. Group with Shape: Group each clipped part with its corresponding clipping shape (if not deleted with the option above). Add Below: Place the clipped images below the clipping shape in the layer stack (if the shape is not deleted with the option above). Animate: Add a simple translation animation to the clipped parts (can be tested only in browser). The extension is designed to be straightforward to use: select an image and the shapes, and apply the extension from the Extensions menu, no reordering of objects is necessary as the extension uses the first available image from selection and all the shapes for clipping. You can find it under Extensions > Generate from Path > Multi-clip Image. I look forward to any feedback or suggestions you might have. Thanks!
Comment here...
cartesianStemPlot
fsmMLK
Inkscape extension to create 2D stem plot (discrete data) The main features are - optional grid lines in X and Y directions - adjustable tick mark intervals and sizes - LaTeX support - can load data from text file This extension is specially useful when used in conjunction with other mathematical tools, e.g. Octave, Matlab, R, etc. to plot data generated by these in Inkscape. You can either provide the data in one string 'Y values' (numbers must be separated by spaces) or by providing the path of a text file containing a table of Y data (in columns). You can inform the preferred field separator. In case of data provided via text file, multiple plots can be generated at once by providing Y data of each plot in different columns. The same 'X values' is assumed.
Comment here...
LaTeXText: Render LaTeX in Inkscape
seebk
This Inkscape extension searches all text elements in a document and renders them with PdfLatex. The rendered text will appear at the same position as the original text and may contain Latex commands and math formula. Modifications of the source text will be considered when the extension is executed again. As the rendered text is added to a new layer, the original document content is not touched and you can always wipe out all modifications from this extension by simply deleting the created layer. Download from: https://github.com/seebk/LaTeXText
Comment here...
Ungrouper And Element Migrator/Filter
Mario Voigt
This extension parses the selection and will put all elements into one single group. If you have a cluster with lots of groups and elements you will clean up this way (one top level group, all elements below it). If you select a single element or a set of elements you just wrap it like using CTRL + G (like making a usual group). You can also use this extension to filter out unwanted SVG elements at all. This tool is also able to drop elements with certain SVG tags to perform some kind of cleanup in the selection. You can drop elements like circle,ellipse,image,line,path,polyline,rect,text,tspan and some more. Notes: - includes "Remove Empty Groups" extension - includes "Apply Transformations" extension
Comment here...
"Cut and remove by shape" extension
jgk
An inkscape extension to cut an open path with a closed one and deleting the parts covered (or not) by it. Like destructive clipping. This is useful for pen plotters and similar devices that cannot deal with clipping masks, but need actually shortened path commands to steer them. For some reason, the established boolean commands only work with closed paths, not with the open ones commonly encountered with plotters and the like. https://github.com/jkrumbiegel/Cut-and-remove-by-shape
Comment here...
Unwind Paths
Mario Voigt
An extension to wrap off paths to receive horizontal lines or extruded bands. Can be used for paper crafting, analysis and other works. You can also just use it to colorize path segments. Docs: https://stadtfabrikanten.org/display/IFM/Unwind+Paths Note: Unwind Paths is similar to https://inkscape.org/~Shoshanaz/%E2%98%85horizontal-lines-effect-hlines, but it is more andvanced as it supports bezier curves and allows to create extruded bands, style config, etc.
Comment here...
Label Pages
Jerome
This extension adds page numbers as labels to all pages. * You can chose a label prefix and whether existing page labels should be kept or replaced. * Appears under Extensions>Pages>Labels from page numbers... * Installation: Unzip to 'User Extensions' folder. History: 2024-01-29: first version.
Comment here...
OptimLaser
FrankI4466
This script optimizes a drawing for laser cutting: - Removes overlapping lines; - Saves the modified file with a new name; - Applies modifications to the entire document or to the selection; - Optimizes the cutting order. Translated in english. Please send me pot file for other languages.
Comment here...
Inkscape Export Hand Poses
lambevin
Inkscape v1.2.0+ plugin to export the hand poses corresponding to your SVG layers. This plugin was developed using Nikolai Shkurkin's plugin export-layers-combo (https://github.com/nshkurkin/inkscape-export-layer-combos) as a base.
Comment here...
Export Layers Redux For Inkscape 1.1+
Vagabond Arcade
This is an update of the old export-layers extension by Xavi, which supports the 1.1+ versions of Inkscape. This extension allows you to batch export each layer as a separate PNG or JPG image by marking the layer with [export] or [fixed] in the layer name before the actual name. Layers marked with [export] will be, surprise, exported as individual images. Layers marked [fixed] will be merged with any other exported layer. I use this tool for animation. Each layer is a separate frame which can then be exported for use with a video editor or game engine. Thanks for this tool, Xavi!
Comment here...
incadiff
Thomas Maziere
Apply successive difference operations on superimposed paths. Useful for plotter addicts as it removes hidden strokes. I use it on Processing generative art, before plotting it with an Axidraw. Select fewer than 64 shapes/paths at a time for performance reasons. Developed thanks to Incaya, a french worker cooperative.
Comment here...
Inkscape Travel Extension
Rich Pang
Copy, rotate, and resize a path or group of paths along a precise parametric trajectory. Tested on Mac OS X High Sierra and Ubuntu Linux (16.04 LTS), with Inkscape 0.91. --- Curated by Maren Hachmann on March 22 2018 12:26 AM: fixed version tag so it will be selectable directly from extensions tag list.
Comment here...
WriteTeX
longqi
An Inkscape extension: Latex/Tex editor for Inkscape, inspired by textext. This extension uses Inkscape build-in extension system, does not require TK or PyGtk as textext. Live preview feature is supported. You can obtain original TeX source from View Original TeX tab. Check http://writetex.tk for more detail. Latest version is in https://github.com/wanglongqi/WriteTeX
Comment here...
Origami-Ext
fdesar
Extension for drawing Origami diagrams. Helps drawing all Huzita-Hatori-Justin Axioms (1-7), find the Rabbit-Ear complementary crease and does angles and segments N-Sections. Fully internationalized : currently, English (native) and a French translation are available. Need Inkscape0.92 or later. Comes with easy install scripts for Linux (tested on Ubuntu and Mint, Fedora & Suse), Windows (tested on Windows 10 Family) and MacOS (tested on High Sierra with MacPorts Inkscape). Enjoy! New version released on 02/01/2020, version 0.70
Comment here...
Page Preview Layer
sonejostudios
Inkscape extension to add a page preview layer with a specific color. For Inkscape 1.x as well as for Inkscape 0.92. Newest version will be updated there: https://github.com/sonejostudios/InkscapePreviewLayer
Comment here...
Frame
Ink dbus
inklinea
Ink Dbus ------------------------------------ 21.01.23 update to automatically detect the python path on windows so should work if you have installed Inkscape to non default folder. ------------------------------------ A test of the new dbus features of Inkscape 1.2.1+ This allows an Inkscape session to be controlled from a separate gui. It supports running basic macros. There are 3 branches of dbus actions: Application / Window / Document Choose an action - add a parameter if required, click run to activate the action. Double click the action to add to the macro list. The items in the macro list can be toggled on / off or deleted. The macro list supports drag reordering of items. You can set a number of repeats - for example you could simplify 72 times if you wanted to. For Ubuntu 20+ everything should work. For Windows 10+ The 'Window' branch of dbus does not work. I have raised an issue on Inkscape gitlab for this. Please note: It does help if you have some knowledge of how the command line works. Most of the Application dbus actions mirror the command line and its parameters. Some of the commands act as 'flags' which are set, for example if you set export-area-page to True, then it has to be set to False again before you can use export-area-drawing set to True. As a quirk export-area which takes dimensions, once used you cannot go back to export-area-page etc. for that session. This is a new feature of Inkscape - so be prepared for exciting things to happen unexpectedly.
Comment here...
Spacey
inklinea
Spacey - An Inkscape Extension Inkscape 1.1+ ** Appears In Extensions Menu Under 'Arrange' ** Just drop the spacey folder into the Inkscape extensions folder. ( It is not necessary to put individual files in the extension folder root) ▶ Gradients across objects ▶ nth Child Colour ▶ csv Colour list import ( uses only the first column which can be css colour name or #hex value, or rgb(1,2,3) value ) (some samples are included) ▶ csv Horiztontal distribution of object ▶ Labelling of objects ( Numbers, Letters, Custom List) ▶ Can crash to the desktop during live preview sometimes - please be aware ▶ Works on simple objects - rectangle, circle, ellipse, path etc ▶ Does not work on clones, or groups. ▶ For repeated csv distribution, transforms must be applied see: https://github.com/Klowner/inkscape-applytransforms
Comment here...
Eraser Layer
Jabiertxo Arraiza Cenoz
V0.4. Create erase layer, all his contents erase content on the associated layer.
Comment here...
PSD Import (2.0)
Martin Owens
This is a revived version of Stuart Pernsteiner's 2012 psd importer. It tries to import vectors from Adobe's psd file format. It ignores raster images.
Comment here...
Page Watermark ( Inkscape 1.2+)
inklinea
Page Watermark - Some simple Page Watermarking An Inkscape 1.2+ extension Appears under Extensions>Pages>Page Watermark ▶ Page Watermark - Some simple Page Watermarking> ▶ Watermarks can be clones or duplicates ▶ Might break with tricky transforms :) https://gitlab.com/inklinea/page-watermark
Comment here...
XIA
Pascal Fautrero
XIA is an extension making possible to convert svg file into two kind of html5 resources : - mini html5 games (based on drag and drop or click principles) - interactive images (with zoom effect on details) downloads : http://xia.funraiders.org
Comment here...
randomDelete
thjazi
This extension allows to delete with a certain probability each of the selected objects. Edit 18/03/2024 : Solve bug with 1.3.2
Comment here...
Delaunay Triangulation
Scott Pakin
This extension is similar to the Voronoi Diagram extension in Delaunay Triangulation mode in that it generates triangulations. The difference is that the Delaunay Triangulation extension triangulates all points in all selected objects while the Voronoi Diagram extension considers only object centroids.
Comment here...
Convert To Polylines
Mario Voigt
This extension takes the points of a path and make a straight polyline out of it. Nothing less, nothing more. You can do the same with default InkScape UI but it might be quicker to use in some use cases. This extension handles duplicate points on a path by removing them.
Comment here...
ImportC2D
ClayJar
An Inkscape input extension to add support for Carbide Create C2D files to the File/Import… dialog. * The stock as defined in Carbide Create is included in the import. * All drawing objects from the C2D file are imported. * Grouping from Carbide Create is fully preserved. * Text is supported if the C2D file has been saved from a recent enough version of Carbide Create. * If the text cannot be imported, you will be notified. *To make the text import, just open the file with a current copy of Carbide Create (e.g. 316 or later) and save. * No toolpath information is imported.
Comment here...
Get and set glyph IDs
Ellen Wasbø
A previous extension (setIDs.py) is now updated for Inkscape v1.1 with some extra features. This extension is used together with the Custom Stroke Font extension to streamline the process of font creating. There are two extensions; get and setGlyphIDs. The getGlyphIDs will fetch all path ids for the glyphs when editing an existing svg-font. The process of editing the paths frequently mess up the path ids and the order of the paths. Then the fetched IDs (or a custom string input) can be used with the setGlyphIDs when the font template is ready to generate the new svg-font. When using the setGlyphIDs, the individual characters of the string is set as path ids for the glyphs left to right as seen on screen (use one row when generating the font template from Custom Stroke Font). Known issue: If a glyph have path id " (doublequote) the extension might fail. Temporarly change that path id to something else (f.x. 'temp') and it should work.
Comment here...
Reverse Order of Subpaths
Ellen Wasbø
When drawing paths and then combining these the order will be from the last to the first drawn. Use this simple extension to reverse the order of the subpaths without reversing the direction of each subpath. Then the original drawn order will be restored. The extension can be found from Extensions > Modify Path. Tested with v1.0.1, v1.0.2 and v1.1 on Windows 10 Use together with the Number Subpaths extension to visualize the effect of this reordering.
Comment here...
Multipagesave
Filter Layer
Jabiertxo Arraiza Cenoz
V0.3. Add current object selected filter to his layer
Comment here...
Sundial Declining
Barcode Extension 2019oct
jerrypenner
Adds the Codabar bar code to the bar-codes render extension. This should run on all platforms.
Comment here...
Xy Data Plot
Christian Hoffmann
Mit dieser Extension können XY-Diagramme in Inkscape erstellt werden. Die Daten müssen in Form von CSV-Dateien zur Verfügung stehen. Create xy-plot from csv-files.
Comment here...
Create Links (Breakaway Connectors)
Mario Voigt
To create tabs in Inkscape, we cannot properly use the integrated eraser tool. It will clip only in a cosmetic fashion but we do not get the real paths we need. Creating links (also known as microtabs, tabs, bridges, breakaway connectors, links, perforations) is sometimes required for laser cutting or vinyl cutting. This extension allows to pinch paths to create according segments - no cosmetic one's, but real segments. It will split up open or closed contours with user defined rules. To get best output please try to close open paths before using. Docs: https://stadtfabrikanten.org/pages/viewpage.action?pageId=104923235
Comment here...
path animation
katkitty
Create svg path animation from frames. A path can be animated as follows: <path d="{orignal frame}"> <animate attributeName="d" attributeType="XML" begin="0s" dur="0.73" repeatCount="2" values="{frame1};{frame2}[;{framen}]"> </path> Most browsers will draw the path, then animate it, interpolating between the paths in the animate values list. Some i-phone browsers do not animate. Grrr. To use: Place each frame of the animation in a layer named 'frame{n}'. Each of these layers should have the same number of paths, and each path should have the same number of points as the corresponding path in other layers. The animation is applied to the paths in the first layer in the sequence, so the properties of that layer are used. Animations with different numbers of frames can be put into different sequences, named 'sequence{n}', using sub-groups: Layers: > not_animated_layer1 > sequence1 >> frame1 >>> path1a >>> path2a >> frame5 >>> path1b >>> path2b >> frame2 >>> path1c >>> path2c >> frame4 >>> path1d >>> path2d > sequence5 >> frame >> frame >> frame NOTE, any numbers on frames or sequence are ignored. The z order of frames and paths determine their position in the animation. SUGGESTION: Set all frames but the first to not display or even delete them before using the animated SVG in a browser. Experiment with different duration times for each path. NOTE: The pop-up box does not close after creating the animate node. The node appears under the paths in the first frame of each sequence. NOTE: Inkscape does NOT run the animation! You need to load the svg into a web browser to see it.
Comment here...
Batch Add & Sort Symbol
RuaridhW
This emulates Inkscape v1.3 gui add_symbol action but also: -Adds each selected object individually NOT grouped as a single symbol. -Alpha-Numeric and Canvas Position sorting options. -Auto-labelling options. -Sorting adjusts object z-axis like Rob Antonishen's restack extn. *NEW* - Alpha-Numeric Sort can be interleaved with existing symbols. -Positional Sort does NOT interact with pre-existing symbols. New symbols added below existing. -Adds an editable Title element to symbol if object title blank. Allows easier retroactive symbol label/name adjustment. -Also includes Quick Add extn which batch adds selected objects unsorted. But .inx adjustable to create own preset of main extn; see readme.txt. -Help and Troubleshooting advice in extension dialogue -For use in managing symbol library file and is intended to aid symbol library creation only. Other uses not tested. -"Symbols Batch Sort and Add..." + "Quick Batch Add Symbols" Placed in Extensions>Symbols -As with any v1.3 extension can give keyboard shortcut. The premise for this extension is that the inbuild symbol add function only allows adding one symbol at a time; multiple selected objects added as a single grouped symbol. Also with 1.3 the symbol library is only displayed in z-axis order NOT alpha-numerically; whilst potential for sort options to be introduced in 1.3.1 in the interim z-axis sort is all that is available. Other Symbol management extensions available: -Alpha Sort (sorts All symbols in current file) -Batch Remove (with Quick Remove Selected) _____ v.1.3 (14/08/23) -Bug fix remove debugging errormsg pop up; no functional change. _____ v.1.2 (14/08/23) -Alpha-Numeric Sort can now be interleaved with existing symbols. _____ v.1.1 (12/08/23) -bug fix unsorted add -simplification of main dialogue tab and py code -Added auto-label number format option -Now 'quick add' + 'add and sort' run off same py. i.e. both .inx ref same .py -'Quick add' + 'add and sort' included in package. -Quick Add Settings guide to allow setting of own preferences(readme.txt)
Comment here...
Sheet Metal Cone
quirxi
This extensions draws the 2D shape which is required to form a 3D cone (or truncated cone) after it's cut out (of whatever material). It can be used to generate a sheet cutting layout for a (truncated) cone. The extension unfolds a frustum (=truncated cone) or a cone (if cut diameter=0) and generates a sheet cutting layout or flat pattern projection that can be rolled or bend up into a (truncated) cone shape. ## References * https://github.com/quirxi/SheetMetalCone/ * https://hobbyutil.googlecode.com/files/LayingOutFrustumWithDividers_20Jul2012.pdf ## Installation Copy the two files 'sheet_metal_conus.inx' and 'sheet_metal_conus.py' into the located in the "src/" folder of the downloadable zip file into inkscape's extensions folder: The exact folder is indicated in: - Edit -> Preferences -> System: User extensions Generally it can be found: -> Linux: ~/.config/inkscape/extensions/ /usr/share/inkscape/extensions/ -> Windows: type the following into the address line on a File Browser window: %appdata%/inkscape/extensions -> Mac OS X: /Applications/Inkscape.app/Contents/Resources/share/inkscape/extensions/ The menu entry for this this extension can be found under: "Extensions->Folded Forms->Sheet Metal Conus..." ## Authors: * quirxi (https://github.com/quirxi) * Neon22 (https://github.com/Neon22)
Comment here...
Inkscape Eurorack
Neon22
Eurorack Panel Designer Enables the design of front panels for Eurorack format typically used in audio equipment. Can be used for laser cutting or for panel layout and design. The Eurorack format calls for modules of 128.5mm (slightly over 5") height. Horizontal width is measured in "horizontal pitch", where 1 HP = 5.08mm (exactly 0.2"). 3.5mm mono phone jacks are used for interconnection. more info: https://en.wikipedia.org/wiki/Eurorack Appears in: Extensions->Render->Eurorack Panel Designer Works in Inkscape 1.0 - 1.3
Comment here...
inkscapeSlopeField
fsmMLK
Extension to create slope fields of first order ordinary differential equations (ODEs) The main features are - generate the slope field plot of a first order ODE - optional grid lines in X and Y directions - adjustable tick mark intervals and sizes - LaTeX support - adjustable density of segments
Comment here...
Bingo Card Creator
Kaalleen
Creates bingo cards with various parameters. Can be used with custom templates.
Comment here...
Imaseq Helper
Croben
WHAT IS IMASEQ HELPER? Imaseq Helper is a free and open-source extension for Inkscape 1.0, released under the GPL version 3 license. This extension allows you to export PNG images by visibility or layers. You can also choose to make the extension duplicate a layer base on a setting, which is a common task when making a frame by frame animation. FEATURES • Export PNG image(s) to a fixed directory. • Export images using the layer name as a file name. • Batch export of rectangles or layers with incremented naming option. • Duplicate layers with incremented name and opacity of your choice. VIDEO https://www.youtube.com/watch?v=kYXFYsGfj7U HOW IT WORKS? To make the extension work, you will have to create a layer that has a “rectangle object” in it. And it has to be a rectangle object, not a circle or rectangle path. This rectangle object will serve as a selection export area. Everything visible within the bounds of the rectangle will be exported as a PNG image. INSTALLATION 1. You must have Inkscape 1.0 installed. 2. Close Inkscape if it is open. 3. Copy or move the imaseq_helper.inx and imaseq_helper.py into Inkscape extension folder. • On Mac and Linux it is in ~/.config/inkscape/extensions. • On Windows it is in C:\Program Files\Inkscape\share\inkscape\extensions. 4. Launch Inkscape. If you install it correctly, you should see “Imaseq Helper” on “Export” sub-menu under the “Extensions” menu. HOW TO USE? 1. Select an “Export Mode” • None – The extension will not export anything. • Visible – Everything visible within the rectangle object gets exported as a single PNG image. • All Layers – Every layer except for the bounds and sub-layers will get exported individually. 2. Set a “Bounds Layer” • Create a new layer, name it, then type the name on the input field. • Add a “rectangle object” and make sure it’s big enough and position it to capture the target view. 3. Give it a “File Name” • You can choose to input a file name or leave it blank to use the layer name. 4. Choose a “Directory” • Set a folder where exported images will be saved. 5. To “Overwrite” or not • If not checked existing file will not be overwritten unless the “Export Mode” is “All Layers” 6. Set image “DPI” • To determine the desired DPI select the “rectangle object,” open export window (Shift+Ctrl+E), go to the "Selection" tab, in the "Image size" section, you can see the DPI. • If you want to export using the dimensions of the rectangle object, you can set the DPI to a number lower than one like zero. 7. To “Duplicate Layer” or not • On the “Layer Settings” tab, you can set to duplicate the selected layer if the “Export Mode” is “Visible” or “None” 8. Set “Layer Opacity” • This slider will determine the opacity of the duplicated layer. FRIENDLY TIPS 1. Using “Multiple” Rectangle Objects • Will not guarantee correct file name order, because the rectangles may get exported randomly. In this case, consider moving the target images to its own layer and use “All Layers” as the export mode. 2. Setting Export Mode To “All Layers” • This mode produces temporary files equal to or more than the number of layers to be exported. Therefore, you are advised to clean these temporary at your convenience. • Setting a file name will not guarantee correct naming order, because layers may get exported randomly. So it is best to leave the file name blank and use the layer name instead. 3. Fixed Background For All Exports • If you have a background on a separate layer and want it to be visible on every export. You can make the background layer a child of the bounds layer. Just make sure you set the alpha or opacity of the rectangle object to zero. 4. Child Layers Are Not Exported Individually • If you have a group of layers, only the parent layer is exported. But if the child layers are visible, then they too will be captured on the exported image. 5. Export Using The Dimensions Of The Rectangle Object • If you set the DPI to zero, the dimension of the rectangle object will be used as the dimension of the image. But keep in mind that if the dimension in “pixels” is not a “whole number,” it will be rounded to the nearest one. Example 24.1 pixels will be 24 pixels, 99.5 pixels will be 100 pixels, etc. GITHUB PAGE https://github.com/crobengames/Imaseq-Helper
Comment here...
Export to LaserGRBL for laser cutting
Nikki.Smith
This free extension for Inkscape speeds up preparation of laser cutting jobs by exporting Gcode to LaserGRBL (included with most laser cutters). Pick your model of laser and material / thickness from pulldown lists, then export a complex job directly into LaserGRBL with one click. Use different coloured lines for each part of a job. eg, red lines to engrave in a single pass at 3000 mm/min @ 80% power, but blue lines cut in 3 passes at 300 mm/min @ 90% power. The emphasis is on it being very easy to use, with the bare minimum of settings. v1.10 14/Oct/2024
Comment here...
PianoScale
Neon22
Designed to illustrate Piano scales. Can input Key and start and end notes as well as intervals. Can also choose locrian etc from menu. Will draw single scales as well as help sheets for entire pages. Appears in Extensions/Music/PianoScale Inkscape 1.0 - 1.3
Comment here...
Typst
jcwinkler
Typst is a markdown-based typesetting system comparable to LaTeX but much easier to learn. This extension renders typst code to svg and inserts it into your Inkscape document. Notes: - This extension will be part of Inkscape by default, most likely starting with Inkscape 1.4. Until then you need to install it as described below. - This extension just inserts a formula into your document. If you need to edit your formulas try the TexText extension, which also supports typst: https://github.com/textext/textext Installation instructions (2 possibilities): A) Installation via Inkscape's Extension Manager 1. Download the zip file 2. Launch Inkscape and open "Extensions" - "Manage Extensions..." 3. Select "Install Packages" and then click on the disk button 4. Select the downloaded zip file and close the extension manager. 5. Restart Inkscape. You will find the extension under "Extensions"- "Text" - "Typst Formula..." B) Manual installation 1. Download the zip file 2. Extract its content into Linux, Mac: ~/.config/inkscape/extensions Windows: C:\Users\AppData\Roaming\inkscape\extensions 3. Restart Inkscape. You will find the extension under "Extensions"- "Text" - "Typst Formula..."
Comment here...